Date   : Tue, 02 Jul 1991 08:14:26 GMT
From   : csus.edu!csusac!sactoh0!ijpc!ianj@decwrl.dec.com (Ian Justman)
Subject: Re: Patch for cp/am??

skar@plains.NoDak.edu (Keith Skar aka Roddy) writes:

> I am using an Apple IIe with Applied Engineering version of cpm
> CP/AM 5.1.1.  I am wondering if there is a Qterm type patch that
> is compatable with it.  I downloaded qterm.patches a long time
> ago and I cant remember if it was the 4.2 patches or the previous
> version of patches.  Can anybody help....

I certainly can.  I -WROTE- one!  See, the Applied Engineering
Z80 Plus card for the II Plus, //e, IIGS and compatibles are
completely compatible with Microsoft's board.  One board will run
the other's CP/M (CP/AM).  In fact, I have a Microsoft SoftCard
(as in the original, not the SoftCard //e) and I tested the patch
under Applied Engineering's CP/AM 5.1 and it works well.  But you
MUST be using a Super Serial card or something like it, i.e. one
that runs a 6551 at memory locations 0E0x8 through 0E0xB where
x=8H + slot.


 ___________________________________________________________________________
|Ian Justman                     |The Rimmer Directive:                     |
|6612 Whitsett Drive  (USPSnet)  |"Never tangle with anything that's got    |
|North Highlands, CA  95660-3830 |more teeth than the entire Osmond Family."|
|(916) 344-5360       (AT&Tnet)  |__________________________________________|
|UUCP:  ...!{ames | apple | sun }!pacbell_                                  |
|UUCP:  ...!ucbvax!ucdavis!csusac_________|-- !sactoh0!ijpc!ianj            |
|___________________________________________________________________________|