<< Previous Message Main Index Next Message >>
<< Previous Message in Thread This Month Next Message in Thread >>
Date   : Mon, 22 Jul 1991 09:13:48 GMT
From   : NEXTASY2.EECS.WSU.EDU!dwatola@ucbvax.Berkeley.EDU (David Watola)
Subject: two z80-based systems for sale

i have to get rid of the following two systems, as soon as possible.  i am
not looking to get rich, merely to cover some of my initial investment
(i only have about $250 invested total) 
and give these systems a good home.  otherwise they get junked.

system #1:  a tei 18-slot motherboard, case, powersupply.  several boards,
including z80 cpu, probably 32-48k ram, (on multiple 8k boards, blech),
a custom disk controller (no drives though), and a 2sio/2pio board.  this
has been tested briefly, just to verify that it powers up and run zapple
properly.

system #2:  a running ccs system.  humongous power supply and case, 18-20
slot motherboard.  disk controller, two 8" drives.  5 serial ports.  64k
ram.  all cards are ccs boards.  most of the documentation on most of the
cards.  bios source, (etc) but i can't currently generate a new system (just
copy bootable disks and modify disk sectors manually to change the bios).
the disk drives are dsdd (1.2 megs).  10-15 1.2 meg disks filled with stuff;
another 30 or so low density (256k) disks.  disk case.

i am in a hurry right now, so i won't go into detail.  send me email and i can
give a complete summary of parts, with factory part numbers.  system #2 has
worked very well for me over the past few years, but i have reached a point
where i can no longer fit everything i own into my  pickup truck so i have
to ditch some of it.  make me an offer and its yours.  you will have to worry
about shipping charges; these suckers weight a ton.  hell, make me a semi
decent offer on system #2 and you can have #1 for a song.  you will probably
have to pay more for postage or shipping than anything else... unless you
are anywhere near pullman, washington (oh, yeah, right!)

please don't make me junk these...  both motherboards are excellent for
prototyping, but who has time for that kind of stuff???

anyway, contact me by email:

dwatola@nextasy2.eecs.wsu.edu
dwatola@yoda.eecs.wsu.edu




End of INFO-CPM Digest V91 Issue #129
*************************************
<< Previous Message Main Index Next Message >>
<< Previous Message in Thread This Month Next Message in Thread >>