Date   : Wed, 13 May 1992 11:00:23 GMT
From   : volker@sfb256.iam.uni-bonn.de ( Volker A. Brandt )
Subject: Looking for VT100 emulator in Z80 source

Hello all!

   I have this old Z80 computer gathering dust that I used to run CP/M
on long ago.  It's a Sharp MZ80B, with 64 KB RAM and a 24x80 screen
built in, two serial ports and several other extras.

   It occurred to me that I could use it as an extra terminal, so here's
my question:  Does anyone have Z80 assembler source for a VT100
emulation?  I don't want to run it off floppy disks, so it must be Z80
assembler.  The terminal emulator will either run in ROM, or I'll load
it from cassette tape.

   I haven't done any Z80 work for years, and I'd rather not write the whole
thing from scratch, so I'm grateful for any source that might be out there.
The CP/M BIOS did emulate a terminal called ADM3A, and I have source to the
complete BIOS, so I just might mangle that.  But I don't really know all the
escape sequences for the VT100, either.

  Anyone out there able to help?  Please reply by email.

  Thanks a lot in advance -- Volker

- -
Bitnet:   UNM409@DBNRHRZ1                              Volker A. Brandt
UUCP:     ...!unido!DBNRHRZ1.bitnet!unm409             Angewandte Mathematik
Internet: volker@sfb256.iam.uni-bonn.de                (Bonn, Germany)