Date   : Thu, 01 Oct 1992 11:30:39 GMT
From   : elroy.jpl.nasa.gov!sdd.hp.com!wupost!waikato.ac.nz!aukuni.ac.nz!kcbbs!kc@ames.arc.nasa.gov (Richard Plinston)
Subject: Transfer cp/m files to elsewhere

   >>>> 30 cp/m machines .. ICL Quadra

   I assume that you mean ICL Quattro.  These run CDOS 4.1 or 5.1.
   (very early machines had CCP/M 3.1S).  You can write DOS 360Kb
   discettes on these machines as long as they are configured to
   have 'PC-Node' included.  Format some 360Kbs on an IBM AT 1.2
   meg drive   (FORMAT A: /4 on the IBM).

   Set the Quattro to use 360Kb discettes:

               OPTION B:=IBM9

   It may say 'read only' but they write OK.  If it won't do this
   run CONFIG, set PC-MODE on and rebuild system.  Reboot and try
   again.

   PC-ALIEN from FBN-Software in Australia can read native Quattro
   discettes (it has them as ICL Model 35/36 DS 96 TPI).

   I can send you Kermit or Modem7 for Quattro if you wish, send me
   a snail-mail address (postal address) and I'll send a disc.
   


End of INFO-CPM Digest V92 Issue #112
*************************************