REM > AP6v1337.src
REM Source for Updated PRES AP6 ROM Manager and Utilities
REM Can test on Master, but ROM Manager workspace clashes
:
REM Boilerplate
ON ERROR REPORT:PRINT" at line ";ERL:END
IF PAGE>&8000:SYS "OS_GetEnv"TOA$:IFLEFT$(A$,5)<>"B6502":OSCLI"B6502"+MID$(A$,INSTR(A$," "))
A$=MID$(A$,1+INSTR(A$," ",1+INSTR(A$," ",1+INSTR(A$," "))))
TARGET$="":IFLEFT$(A$,7)="TARGET=":TARGET$=MID$(A$,8)
DEFFNif(A%):IFA%:z%=0:=opt% ELSE z%=P%:=opt%AND-2
DEFFNendif:IFz%:z%=P%-z%:P%=P%-z%:O%=O%-z%:=opt% ELSE =opt%
DEFFNelse:IFz%:z%=P%-z%:P%=P%-z%:O%=O%-z%:z%=0:=opt% ELSE z%=P%:=opt%AND-2
:
name$="AP6"
DIM mcode% &3000,L% -1:load%=&8000
OS_CLI=&FFF7:OSBYTE=&FFF4:OSWORD=&FFF1:OSWRCH=&FFEE
OSWRCR=&FFEC:OSNEWL=&FFE7:OSASCI=&FFE3:OSRDCH=&FFE0
OSFILE=&FFDD:OSARGS=&FFDA:OSBGET=&FFD7:OSBPUT=&FFD4
OSGBPB=&FFD1:OSFIND=&FFCE:GSINIT=&FFC2:GSREAD=&FFC5
FSCV=&21E:WHATOS=0
:
TARGET%=-1:REM Build for 6502Em with no FDC hardware, no real ADFS
TARGET%=1 :REM Build for BBC B/B+
TARGET%=3 :REM Build for Master
TARGET%=5 :REM Build for Compact
TARGET%=0 :REM Build for Electron
IF TARGET$<>"":TARGET%=VALTARGET$
:
:
ver$="1.323":date$="25 Jan 2019"
REM              Added option *SRPAGE <rom> <page> (I).
REM              *ROMS doesn't wrap over end of line.
:
ver$="1.324":date$="15 Apr 2020"
REM 21-Apr-2020: Removed pre-v1.323 code
REM              *SRLOAD faults loading over myself
:
ver$="1.33":date$="02 May 2020"
REM              *INSERT/*UNPLUG code almost identical, merged
REM To do:
REM  Single code, multiple platform
:
ver$="1.332":date$="16 Jun 2020"
REM              Bugfix *SRLOAD/*SRWIPE, if AP6 ROM not in bank 0, always gave 'Not writable'
REM              Fixed where TubeDisable broken from removing old code
:
ver$="1.333":date$="16 Jun 2020"
REM              Artificial bump to get past bodged upload
:
ver$="1.334":date$="30 Dec 2020"
REM              *-BREAK
ver$="1.335":date$="04 Jan 2021"
REM              *SRPAGE dosn't lose <rom>
REM              Removed pre-v1.335 code
:
ver$="1.336"
REM              Optimised ScanDec routines
ver$="1.337"
REM              Optimised some SROM code
:
REM Thoughts: *INSERT/*UNPLUG/*LANG/*TUBE call OSBYTE 162
REM OSBYTE 161/162 pass on to any Configure Module before implementing manuall
REM eg set/reset &DF0,X.b6 to pass on
:
:
REM Base addresses
REM --------------
IF TARGET%<1              :FDCbase=&FCC4:fdcRES=&20:fdcSIDE=&04:ROMSEL=&FE05:TUBEIO=&FCE0:ROMTABLE=&2A0:FILEBLK=&2E2:REM Electron
IF TARGET%=1 OR TARGET%=2 :FDCbase=&FE84:fdcRES=&20:fdcSIDE=&04:ROMSEL=&FE30:TUBEIO=&FEE0:ROMTABLE=&2A1:FILEBLK=&2EE:REM BBC
IF TARGET%>2 AND TARGET%<6:FDCbase=&FE28:fdcRES=&04:fdcSIDE=&10:ROMSEL=&FE30:TUBEIO=&FEE0:ROMTABLE=&2A1:FILEBLK=&2ED:REM Master
IF TARGET%=0:name$="AP6" ELSE name$="SRAM"
:
REM Workspace
REM ---------
LAC=&AC:LAE=&AC:NUM=&AC         :REM Command workspace
L0D70=&0D70                     :REM Saved file vectors
L0930=&0930                     :REM Base of *FORMAT workspace
L09D0=FILEBLK+1:L09EC=FILEBLK+12:REM Base of *VERIFY workspace
L0D6C=&0D6C:L0D6D=&0D6D         :REM ROM manager settings
L0D6E=&0D6E:L0D6F=&0D6F         :REM UNPLUG bitmap
:
REM *FORMAT workspace
REM -----------------
L093B=FILEBLK+0:L0935=FILEBLK+16:L0936=FILEBLK+17
L0938=FILEBLK+1:L093C=FILEBLK+2:L093F=FILEBLK+3:L093E=FILEBLK+4
L0930=FILEBLK+5:L0932=FILEBLK+6:L0931=FILEBLK+7:L0933=&AB
L0939=&AE:L093A=&AF
:
REM *VERIFY workspace
REM -----------------
L09ED=L09EC+1:L09EE=L09EC+2:L09EF=L09EC+3
L09D1=L09D0+1:L09D2=L09D0+2:L09D3=L09D0+3:L09D4=L09D0+4:L09D5=L09D0+5
L09D6=L09D0+6:L09D7=L09D0+7:L09D8=L09D0+8:L09D9=L09D0+9:L09DA=L09D0+&A
:
REM Workspace
REM ---------
REM &A8-&AF *commands
REM  &AB  =previous NMI owner
REM  &AC/D=>formatting data
REM  &AE/F=>main memory workspace, verify buffer
REM
REM &0D68-&0D6C Plus 1 Support
REM &0D6D-&0D6F ROM Manager Support
REM &0D70-&0D7F ROM/TAPE intercept
REM
REM &0D6D If b7=0 - default language ROM in b7-b6,b3-b0, b5=TubeDisable, b4=spare
REM &0D6E INSERT/UNPLUG bitmap 0-7, b7=7, 0=inserted, 1=unplugged
REM &0D6F INSERT/UNPLUG bitmap 8-15, b7=15, 0=inserted, 1=unplugged
:
:
REM I/O addresses
REM -------------
FDCstatus =FDCbase+0
FDCcommand=FDCbase+0
FDCtrack  =FDCbase+1
FDCsector =FDCbase+2
FDCdata   =FDCbase+3
FDCdrive  =FDCbase-4
:
REM &FCC0-08 Floppy disk controller
REM  &FCC0 Drive select register
REM  &FCC4 FDC command/status
REM  &FCC7 FDC data
REM
REM &FCD8/&FCD9 lock/unlock register bank 5/6
REM &FCDA/&FCDB lock/unlock register bank 13/15
REM &FCDC/&FCDD lock/unlock register bank 0/2
REM &FCDE/&FCDF lock/unlock register bank 1/3
REM
REM &FCFC AQR paging register
REM &FCFD unlock AQR
REM &FCFE lock AQR
:
:
file$=name$+"v"+LEFT$(ver$,1)+MID$(ver$,3,2)+MID$(" BBMEC",TARGET%+1,1)
FOR pass%=0 TO 3
opt%=FNsm_pass(pass%)
[OPT opt%
\ ********************************
\ Updated ROM Management Functions
\ ********************************

.ROMStart
EQUB &00:EQUW RelocTable
JMP ROMMgrServ
EQUB &82:EQUB ROMMgrCopy-ROMStart-1
EQUB EVAL("&"+MID$(ver$,3,2))
EQUS "ROM Manager & Utils":EQUB 0
EQUS LEFT$(ver$,4)+" ("+date$+")":EQUB 0
.ROMMgrCopy
EQUS "(C)J.G.Harston":EQUB 0
.ROMMgrServ
PHA
LDA &0DF0,X:BMI ROMMgrExit :\ Disabled, ignore call
PLA:PHA
CMP #1:BNE P%+5:JMP Serv1
CMP #4:BNE P%+5:JMP Serv4
CMP #7:BNE P%+5:JMP Serv7
CMP #9:BNE P%+5:JMP Serv9
CMP #&10:BNE P%+5:JMP Serv10
.ROMMgrExit
PLA:RTS


\ Generate inline error
\ =====================
.MkError
PLA:STA &FD:PLA:STA &FE
LDY #0
.MkErrorLp
INY:LDA (&FD),Y:STA &100,Y
BNE MkErrorLp
STA &100:JMP &100


\ Print inline text
\ =================
\ Corrupts A,X,Y
\
.PrText
PLA:STA &F6:PLA:STA &F7:LDY #1
.PrTextLp
LDA (&F6),Y:BEQ PrTextEnd
JSR OSASCI:INY:BNE PrTextLp
.PrTextEnd
CLC:TYA:ADC &F6:TAY
LDA #0:ADC &F7:PHA
TYA:PHA:RTS

\ Print character in Y if MI set, else space
\ ------------------------------------------
.PrCharY
BPL PrSpace               :\ MI not set, print a space
TYA:JMP OSWRCH            :\ MI set, print the character

\ Print spaces
\ ============
.Pr2Spaces
JSR PrSpace
.PrSpace
LDA #ASC" ":JMP OSASCI

\ Print line number in &A8/9
\ ==========================
.PrLineNumSpc
JSR PrLineNum:BCC PrSpace
.PrLineNum
SED:CLC
LDA &A8:ADC #&01:STA &A8  :\ Increment &A8/A9 in decimal mode
.LBFE4
LDA &A9:ADC #&00:STA &A9
CLD:JSR PrHex             :\ Print high byte
LDA &A8                   :\ Print low byte
:
\ Print hex number in A
\ =====================
.PrHex
PHA:LSR A:LSR A:LSR A
LSR A:JSR PrNybble:PLA
.PrNybble
AND #&0F:CMP #&0A
BCC PrDigit:ADC #&06
.PrDigit
ADC #&30:JMP OSWRCH

\ Print validated character
\ =========================
.PrChar
AND #&7F
CMP #&20:BCC X8C71
CMP #&7F:BCC X8C73
.X8C71
LDA #ASC"."
.X8C73
JMP OSWRCH


\ Skip spaces
\ ===========
\ Returns A=non-space character
\         CS=more parameters
\         CC=no parameters, at <cr>
.SkipSpaces1
INY
.SkipSpaces
LDA (&F2),Y:CMP #ASC" "
BEQ SkipSpaces1:RTS


\ Parse number
\ ============
OPT FNif(VALver$<1.336)
\\ Scan for short number
\\ ---------------------
\\ Scans for hex or dec 0-15 or 0-F, or <cr>
\\ Returns CC, A=number
\\         error if empty command line
\\
\.ScanDec8 \\ *** TO DO - scan 8-bit decimal
\.ScanDec4
\\JSR L8CA5:BCC L8D00
\.errBadNumber
\JSR MkError:EQUB 252:EQUS "Bad number":BRK
\
\\ Scan for <rom> or *
\.L8CA0
\LDA (&F2),Y
\CMP #ASC"*":BEQ ChkDigitOk      :\ EQ+CC='*', EQ+CS=<cr>, NE=<num>
\:
\\ Scan for <rom> or ""
\\ Scan for optional short number
\\ ------------------------------
\\ Scans for hex or dec 0-15 or 0-F, or <cr>
\\ Returns CC, A=number
\\         CS, empty command line
\\
\.L8CA5
\LDA (&F2),Y
\CMP #&0D:BEQ ChkNotDigit        :\ Return CS=empty line
\JSR CheckDigit:BCS errBadNumber :\ Must start with a digit
\CMP #1:BNE ChkDigitEnd          :\ Not '1', check end of number
\LDA (&F2),Y                     :\ Get next digit
\JSR CheckDigit:BCC ChkDigitTen  :\ Valid digit, check terminator
\LDA #1:BCS ChkDigitEnd          :\ Just '1', check terminator
.ChkDigitTen
\ADC #10                         :\ Convert 1x to 10-15
\CMP #16:BCS errBadNumber        :\ 16-19, too big
.ChkDigitEnd
\PHA:LDA (&F2),Y                 :\ Get following character
\CMP #ASC"!":BCC ChkDigitDone    :\ Followed by <spc> or <cr>, return
\CMP #ASC",":BNE errBadNumber    :\ Followed by non-comma, error
.ChkDigitDone
\PLA:CMP #&FF                    :\ Return number, CC=ok, NE=number
.L8D00
\RTS
\:
.ChkDigitOne
\LDA #ASC"1"
\.CheckDigit
\CMP #ASC"0":BCC ChkNotDigit   :\ CC=not hex digit
\CMP #ASC"9"+1:BCC ChkDigit    :\ CC=digit
\CMP #ASC"A":BCC ChkNotDigit   :\ CC=not hex digit
\AND #&DF
\CMP #ASC"F"+1:BCS ChkNotDigit :\ CS=not hex digit
\SBC #6
.ChkDigit
\AND #15:INY                   :\ Step past digit
.ChkDigitOk
\CLC:RTS                       :\ CC=ok, A=digit
.ChkNotDigit
\SEC:RTS                       :\ CS=not ok
:
OPT FNelse
:
\ Parse "" * or <rom>
\ -------------------
.X8CA0
.L8CA0
LDA (&F2),Y
CMP #ASC"*":BEQ ChkDigitCC      :\ EQ+CC='*'
:
\ Parse "" or <rom>
\ -------------------
.X8CA5
.L8CA5
LDA (&F2),Y
CMP #13:BEQ ChkDigitCS          :\ EQ+CS=<cr>
:
\ Parse 4-bit <rom>
\ -----------------
.XScanDec4
.ScanDec4
JSR ScanDec8
CMP #&10:BCS XerrBadNumber      :\ Too big
RTS                             :\ NE+CC=<num>
:
\ Parse 8-bit <num>
\ -----------------
.ScanDec8
JSR CheckDigit:BCS XerrBadNumber
STA NUM                         :\ Store as current number
CMP #10:BCS ScanDecDone         :\ Hex number, exit
.ScanDecLp
JSR ScanDigit:BCS ScanDecDone   :\ No more digits   
PHA                             :\ Save digit
LDA NUM:CMP #26:BCS errBadNumber:\ num>25, num*25>255
ASL A:ASL A:ADC NUM:ASL A       :\ num=num*10
STA NUM:PLA:ADC NUM:STA NUM     :\ num=num*10+digit
BCC ScanDecLp                   :\ Loop for next digit
.XerrBadNumber
.errBadNumber
JSR MkError:EQUB 252:EQUS "Bad number":BRK
.ScanDecDone
LDA (&F2),Y
CMP #ASC"!":BCS XerrBadNumber   :\ Badly terminated number
LDA NUM
.ChkDigitCS
SEC:RTS                         :\ Return A=number, CS
:
.CheckDigit
LDA (&F2),Y
CMP #ASC"A":BCC ScanDigit2      :\ Decimal digit
AND #&DF
CMP #ASC"F"+1:BCS ChkDigitCS    :\ >'F'
SBC #6:BNE ScanDigit3           :\ Convert 'A'-'F'
.ScanDigit
LDA (&F2),Y
.ScanDigit2
CMP #ASC"0":BCC ChkDigitCS      :\ <'0'
CMP #ASC"9"+1:BCS ChkDigitCS    :\ >'9'
.ScanDigit3
INY:AND #&0F
.ChkDigitCC
CLC:RTS                         :\ Return A=digit, CC
OPT FNendif


\ SERVICE 1 - Do Reset processing
\ ===============================
.Serv1
TYA:PHA                    :\ Save current workspace address
OPT FNif(TARGET%<3)
  LDA L0D6D:ASL A:ASL A    :\ Get Tube Enable from bit 5
  BPL Serv1a               :\ bit 5 = 0, not disabled
  LDA #0:STA &027A         :\ Disable Tube
  LDA &FFB7:STA &A8        :\ Point to default vectors
  LDA &FFB8:STA &A9        :\ Reset EVENTV and BRKV
  LDY #&21                 :\ Point to EVENTV
  .Serv1lp
  LDA (&A8),Y:STA &200,Y
  CPY #&20:BNE P%+4:LDY #4 :\ EVENTV done, point to BRKV+1
  DEY:CPY #1:BNE Serv1lp
OPT FNendif
.Serv1a
LDA &028D
CMP #&01:BNE Serv1Done   :\ Check last Break type
LDY #1:JSR LockUnlockAll :\ If Power on, lock (write protect) all ROMs
.Serv1Done
PLA:TAY
.Serv1Exit
PLA:RTS


\ SERVICE 7 - Read/Write configuration settings
\ =============================================
.Serv7
LDA &EF
CMP #&A1:BEQ Serv7go     :\ OSBYTE &A1 - Read settings
CMP #&A2:BNE Serv1Exit   :\ OSBYTE &A2 - Write settings
.Serv7go
LDX &F0
CPX #15:BEQ Serv7Tube    :\ Location 15, Tube On/Off
CPX #5:BCC Serv1Exit
CPX #8:BCS Serv1Exit
\  5 = b4-b7=LANG
\  6 = b0-b7=unplug bitmap 0-7
\  7 = b0-b7=unplug bitmap 8-15
\ 15 = b0, 0=NoTube, 1=Tube
LSR A:BCC Serv7Write
LDA L0D6D-5,X            :\ Read configuration setting
CPX #5:BNE Serv7RdOk     :\ Return unplug bitmap
ASL A:ASL A:ASL A:ASL A  :\ Move LANG to b4-b7
EOR #&FF
.Serv7RdOk
EOR #&FF:TAY             :\ Return in Y
.Serv7Done
PLA:LDA #0:RTS           :\ Claim and return
.Serv7Write
TYA:EOR #&FF             :\ Toggle unplug bitmap
CPX #5:BNE Serv7WrOk
LSR A:LSR A:LSR A:LSR A  :\ A=0000llll
EOR L0D6D                :\ A=xxTxWWWW
AND #&0F                 :\ A=0000WWWW
EOR L0D6D                :\ A=xxTxllll
EOR #&0F                 :\ A=xxTxLLLL
.Serv7WrOk
STA L0D6D-5,X:JMP Serv7Done
.Serv7Tube
LSR A:BCS Serv7TubeRd    :\ Jump with Read
.Serv7TubeWr
TYA:LSR A                :\ Cy=~T
LDA L0D6D                :\ A=xxTxLLLL
AND #&DF                 :\ A=xx0xLLLL
BCS Serv7WrOk            :\ Enable Tube
ORA #&20:BNE Serv7WrOk   :\ Disable Tube
.Serv7TubeRd
LDA L0D6D                :\ A=xxTxLLLL
AND #&20:CMP #&20        :\ A=00Tx0000
LDA #&FE:ADC #0          :\ A=1111111T
JMP Serv7RdOk            :\ EOR FF and return


\ SERVICE &10 - Spool/Exec closing
\ ================================
\ Insert/Unplug ROMs
\ Needs to be done before Serv1, on BBC/Elk Serv10 before Serv01
\ Ctrl-CAPS check needs to be done here to enable ROM before Serv01
\ Check Ctrl-* and jump to *-prompt
\
.Serv10
LDA &EF:ORA &F0
ORA &F1:BNE Serv10Exit   :\ Not BREAK, skip
LDA &028D
CMP #&01:BNE X813E       :\ Not Power-On, insert/unplug ROMs
OPT FNif(TARGET%<3)
  \ &024B=00xxrrrr - 6502 BASIC ROM
  \      =01xxrrrr - 6502 BASIC don't relocate
  \      =10xxrrrr - non-6502 BASIC ROM
  \      =11xxxxxx - no BASIC
  LDA &024B              :\ Get BASIC ROM number
  .Serv10SetLang
  EOR L0D6D:AND #&CF     :\ Clear and merge LANG bits
  EOR L0D6D:STA L0D6D    :\ Default language = BASIC
OPT FNendif
PLA:RTS
:
.X813E
LDX #15:LDA L0D6F        :\ Unplug bitmap for ROMs 8-15
.Serv10Lp1
CPX #7:BNE Serv10a
LDA L0D6E                :\ Unplug bitmap for ROMs 0-7
.Serv10a
ROL A:BCC Serv10Next           :\ Leave inserted
PHA:LDA #0:STA ROMTABLE,X:PLA  :\ Remove from ROM table
.Serv10Next
DEX:BPL Serv10Lp1        :\ Loop down to ROM 0
\.Serv10Done
LDA #&7A:JSR OSBYTE       :\ Check keys pressed
CPX #&48:BEQ Serv10Enable :\ *
CPX #&5B:BEQ Serv10Enable :\ K*
CPX #&40:BNE Serv10Exit   :\ CAPSLOCK
CLC                       :\ CLC=CAPSLOCK
.Serv10Enable
PHP:LDA #&78:JSR OSBYTE   :\ Clear keypressed info
LDA &8006
LDX &F4:STA ROMTABLE,X    :\ Re-enable myself
PLP:BCC Serv10Exit
JSR MkError:EQUB 249:EQUS "Supervisor":BRK
.Serv10Exit
PLA:RTS


\ SERVICE 4 - *command
\ ====================
\ Only ever passed commands starting with a letter
.Serv4
LDA (&F2),Y:AND #&DF
CMP #ASC"P":BNE Serv4Go     :\ Command prefixed by 'P'?
INY:JSR Serv4Prefix:DEY     :\ Check for prefixed command
TAX:BNE Serv10Exit          :\ Not recognised, return unclaimed
PLA:TXA:RTS                 :\ Recognised, claim and return
.Serv4Prefix
PHA
.Serv4Go
LDX #cmdFILE-cmdBase        :\ Point to command table
.Serv4a
TYA:PHA                     :\ Save start of command line
.CmdLookNext
PLA:PHA:TAY                 :\ Get text offset back
.CmdLookLp
LDA (&F2),Y:CMP #ASC".":BEQ CmdMatchDot
CMP cmdBase,X:BEQ CmdLook2
AND #&DF:CMP cmdBase,X:BNE CmdNoMatch
.CmdLook2
INX:INY                     :\ Step to next character
LDA cmdBase,X:BPL CmdLookLp :\ Not a full command
LDA (&F2),Y                 :\ Get following character
CMP #ASC"A":BCS CmdCheckNext:\ Ensure command ends with non-alpha
.CmdFoundSpc
JSR SkipSpaces              :\ Move past any spaces
LDA cmdBase,X:ASL A:TAX     :\ Get command byte, index into addresses
PLA:STA &F5:PLA             :\ Get saved Y and A
CMP #9:BEQ HelpDispatch     :\ Do *Help
JSR CmdDispatch:LDA #0:RTS  :\ Call command, claim call
.CmdDispatch
LDA cmdAddrs-2+1,X:PHA      :\ Get command address
LDA cmdAddrs-2+0,X:PHA
LDA #0:RTS                  :\ Jump to routine via stack
\ On entry to routines,
\  A=0, (&F2),Y=>command line, skipped past any spaces
:
.CmdMatchDot
LDA cmdBase,X               :\ Is there still more name to match?
BMI CmdCheckNext            :\ End of name, the dot is after end of command name
INY                         :\ Step past '.'
.CmdMatchDotLp
INX:LDA cmdBase,X
BPL CmdMatchDotLp           :\ Find end of table entry
BMI CmdFoundSpc             :\ Jump to enter command
:
.CmdNoMatch
INX:LDA cmdBase,X
BPL CmdNoMatch              :\ Find end of table entry
.CmdCheckNext
INX:LDA cmdBase,X
BPL CmdLookNext             :\ Loop until table terminator found
INX:ASL A:BPL CmdLookNext   :\ Not end of final table
JMP ServQuit


\ SERVICE 9 - *Help
\ =================
.Serv9
LDA (&F2),Y:CMP #13:BEQ HelpShort
CMP #ASC".":BEQ HelpLong
LDX #cmdHELP-cmdBase
JMP Serv4a
.HelpShort
TYA:PHA
SEC:JSR PrintHelpTitleLong
LDX #cmdHELP-cmdBase
LDY #hlpHELP-hlpBase
JSR HelpLp1
.ServQuit
PLA:TAY:LDX &F4:PLA:RTS
:
.HelpDispatch
PHA:LDA &F5:PHA          :\ Save Y and A again
LDY cmdAddrs-2+1,X       :\ Offset to help strings
LDA cmdAddrs-2+0,X:TAX   :\ Offset to command strings
BEQ HelpSpecial
JSR HelpPrint
JMP ServQuit
:
.HelpLong
TYA:PHA
LDX #cmdFILE-cmdBase:LDY #hlpFILE-hlpBase:JSR HelpPrint
LDX #cmdSRAM-cmdBase:LDY #hlpSRAM-hlpBase:JSR HelpPrint
JMP ServQuit
:
\ *Help +1
.HelpSpecial
SEC:JSR PrintHelpTitleLong
LDX #0
.HelpPlus1Lp
TXA:PHA
LDA idxPlus1+1,X:TAY
LDA idxPlus1+0,X:TAX
JSR HelpPrCmd
PLA:TAX:INX:INX
LDA idxPlus1,X
BNE HelpPlus1Lp
BEQ ServQuit
:
.HelpPrint
JSR PrintHelpTitle
JSR OSNEWL
.HelpLp1
JSR HelpPrCmd       :\ Print this command string
INX:LDA cmdBase,X   :\ Get first byte from next
BPL HelpLp1:RTS     :\ Loop if not terminator
:
.HelpPrCmd
JSR Pr2Spaces
.HelpPrLp1
LDA cmdBase,X:BMI HelpPrSyntax
JSR OSWRCH:INX:BNE HelpPrLp1
.HelpPrSyntax
.HelpPrLpSpc
JSR PrSpace
SEC:LDA &318:SBC &308:SBC #12
BCC HelpPrLpSpc
.HelpLp2
LDA hlpBase,Y:JSR OSASCI
INY:CMP #13:BNE HelpLp2
RTS
:
.PrintHelpTitle
CLC
.PrintHelpTitleLong
TYA:PHA:TXA:PHA
PHP:JSR PrText:EQUB 13
OPT FNif(TARGET%=0)
  EQUS "RetroHardware Plus 1 Support "+LEFT$(ver$,4)+LEFT$(CHR$(96+VALRIGHT$(ver$,1)),LENver$>4)
OPT FNelse
  EQUS "ROM Manager and Utilities "+LEFT$(ver$,4)+LEFT$(CHR$(96+VALRIGHT$(ver$,1)),LENver$>4)
OPT FNendif 
EQUB 0
PLP:BCC PrHelpTitleDone
OPT FNif(TARGET%=0)
  LDA &30A:SBC &308:SBC #47:BCC PrHelpTitleDone1
  JSR PrText
  EQUS " (ADC/Printer/RS423)"
  EQUB 0
OPT FNendif 
.PrHelpTitleDone1
JSR OSNEWL
.PrHelpTitleDone
PLA:TAX:PLA:TAY
RTS


\ Command tables
\ --------------
\ *Help lists until bit 7 set
\ *command lookup searches until &FF terminator
\ So, commands between &80 and &FF are executed but not listed
\
.cmdBase
.cmdHELP
EQUS "+1"   :EQUB &81
EQUS "SRAM" :EQUB &82
EQUS "UTILS":EQUB &83
EQUB &80
EQUS "SROM" :EQUB &82
EQUB &FF
:
.cmdFILE
.cmdBUILD   :EQUS "BUILD"   :EQUB &84
.cmdDUMP    :EQUS "DUMP"    :EQUB &85
.cmdFORMAT  :EQUS "FORMAT"  :EQUB &86
.cmdLIST    :EQUS "LIST"    :EQUB &87
.cmdTUBE    :EQUS "TUBE"    :EQUB &88
.cmdTYPE    :EQUS "TYPE"    :EQUB &89
.cmdVERIFY  :EQUS "VERIFY"  :EQUB &8A
EQUB &80
:
.cmdSRAM
.cmdAQRPAGE :EQUS "AQRPAGE" :EQUB &97
.cmdINSERT  :EQUS "INSERT"  :EQUB &8B
.cmdLANG    :EQUS "LANG"    :EQUB &8C
.cmdLROMS   :EQUS "LROMS"   :EQUB &8D
.cmdROMS    :EQUS "ROMS"    :EQUB &8E
.cmdSRLOAD  :EQUS "SRLOAD"  :EQUB &90
.cmdSRLOCK  :EQUS "SRLOCK"  :EQUB &91
.cmdSRPAGE  :EQUS "SRPAGE"  :EQUB &8F
.cmdSRSAVE  :EQUS "SRSAVE"  :EQUB &92
.cmdSRUNLOCK:EQUS "SRUNLOCK":EQUB &93
.cmdSRWIPE  :EQUS "SRWIPE"  :EQUB &94
.cmdUNPLUG  :EQUS "UNPLUG"  :EQUB &95
.cmdUROMS   :EQUS "UROMS"   :EQUB &96
EQUB &80
:
.cmdPlus1
.cmdLOADROM :EQUS "LOADROM":EQUB &90
.cmdLOCK    :EQUS "LOCK"   :EQUB &91
.cmdRLOAD   :EQUS "RLOAD"  :EQUB &90
.cmdRSAVE   :EQUS "RSAVE"  :EQUB &92
.cmdSAVEROM :EQUS "SAVEROM":EQUB &92
.cmdUNLOCK  :EQUS "UNLOCK" :EQUB &93
.cmdZERO    :EQUS "ZERO"   :EQUB &94
EQUB &FF
]:A%=P%-cmdBase:IF A%>255:IF (pass%AND3)=0:P."WARNING: Command table ";A%-255;" bytes too long"
[OPT opt%
:
\ Command help strings
\ --------------------
.hlpBase
.hlpFILE
.hlpBUILD   :EQUS "<file>":EQUB 13
.hlpDUMP    :EQUS "<file>":EQUB 13
.hlpFORMAT  :EQUS "<drive> <S|M|L> (Y)":EQUB 13
.hlpLIST    :EQUS "<file>":EQUB 13
.hlpTUBE    :EQUS "ON|OFF|<num>":EQUB 13
.hlpTYPE    :EQUS "<file>":EQUB 13
.hlpVERIFY  :EQUS "<drive>":EQUB 13
:
.hlpSRAM
.hlpAQRPAGE :EQUS "<page>":EQUB 13
.hlpINSERT  :EQUS "(<rom> (I))":EQUB 13
.hlpLANG    :EQUS "(<rom>)":EQUB 13
.hlpLROMS   :EQUS "":EQUB 13
.hlpROMS    :EQUS "":EQUB 13
.hlpSRLOAD  :EQUS "<file> <rom> (U)(L)(I)":EQUB 13
.hlpSRLOCK  :EQUS "(<rom>)":EQUB 13
.hlpSRPAGE  :EQUS "<rom> <page> (I)":EQUB 13
.hlpSRSAVE  :EQUS "<file> <rom>":EQUB 13
.hlpSRUNLOCK:EQUS "(<rom>)":EQUB 13
.hlpSRWIPE  :EQUS "<rom> (U)(L)":EQUB 13
.hlpUNPLUG  :EQUS "(<rom> (U))":EQUB 13
.hlpUROMS   :EQUS "":EQUB 13
.hlpHELP    :EQUB 13:EQUB 13:EQUB 13
]:A%=P%-hlpBase:IF A%>255:IF (pass%AND3)=0:P."WARNING: Help table ";A%-255;" bytes too long"
[OPT opt%
:
\ Command dispatch addresses
\ --------------------------
.cmdAddrs
EQUW 0                                    :\ +1    &81
EQUB cmdSRAM-cmdBase:EQUB hlpSRAM-hlpBase :\ SRAM  &82
EQUB cmdFILE-cmdBase:EQUB hlpFILE-hlpBase :\ UTILS &83
EQUW BUILD-1    :\ &84
EQUW DUMP-1     :\ &85
EQUW AFORMAT-1  :\ &86
EQUW FLIST-1    :\ &87
EQUW TUBE-1     :\ &88
EQUW TYPE-1     :\ &89
EQUW VERIFY-1   :\ &8A
EQUW INSERT-1   :\ &8B
EQUW LANG-1     :\ &8C
EQUW LROMS-1    :\ &8D
EQUW ROMS-1     :\ &8E
EQUW SRPAGE-1   :\ &8F
EQUW SRLOAD-1   :\ &90
EQUW SRLOCK-1   :\ &91
EQUW SRSAVE-1   :\ &92
EQUW SRUNLOCK-1 :\ &93
EQUW SRWIPE-1   :\ &94
EQUW UNPLUG-1   :\ &95
EQUW UROMS-1    :\ &96
EQUW AQRPAGE-1  :\ &97
:
\ *Help +1 offsets
\ ----------------
.idxPlus1
EQUB cmdAQRPAGE-cmdBase:EQUB hlpAQRPAGE -hlpBase
EQUB cmdBUILD  -cmdBase:EQUB hlpBUILD   -hlpBase
EQUB cmdDUMP   -cmdBase:EQUB hlpDUMP    -hlpBase
EQUB cmdFORMAT -cmdBase:EQUB hlpFORMAT  -hlpBase
EQUB cmdINSERT -cmdBase:EQUB hlpINSERT  -hlpBase
EQUB cmdLANG   -cmdBase:EQUB hlpLANG    -hlpBase
EQUB cmdLIST   -cmdBase:EQUB hlpLIST    -hlpBase
EQUB cmdLOADROM-cmdBase:EQUB hlpSRLOAD  -hlpBase
EQUB cmdLOCK   -cmdBase:EQUB hlpSRLOCK  -hlpBase
EQUB cmdLROMS  -cmdBase:EQUB hlpLROMS   -hlpBase
EQUB cmdRLOAD  -cmdBase:EQUB hlpSRLOAD  -hlpBase
EQUB cmdRSAVE  -cmdBase:EQUB hlpSRSAVE  -hlpBase
EQUB cmdROMS   -cmdBase:EQUB hlpROMS    -hlpBase
EQUB cmdSAVEROM-cmdBase:EQUB hlpSRSAVE  -hlpBase
EQUB cmdSRPAGE -cmdBase:EQUB hlpSRPAGE  -hlpBase
EQUB cmdTUBE   -cmdBase:EQUB hlpTUBE    -hlpBase
EQUB cmdTYPE   -cmdBase:EQUB hlpTYPE    -hlpBase
EQUB cmdUNLOCK -cmdBase:EQUB hlpSRUNLOCK-hlpBase
EQUB cmdUNPLUG -cmdBase:EQUB hlpUNPLUG  -hlpBase
EQUB cmdUROMS  -cmdBase:EQUB hlpUROMS   -hlpBase
EQUB cmdVERIFY -cmdBase:EQUB hlpVERIFY  -hlpBase
EQUB cmdZERO   -cmdBase:EQUB hlpSRWIPE  -hlpBase
EQUB &00


\ *************
\ FILE COMMANDS
\ *************

\ Workspace for UTILS commands
\  &A8-&AF = 'MOUNT x'<cr> command
\  &A8/9=line number
\  &AA  =CR/LF flag, BUILD handle
\  &AB  =type/list flag, dump EOF,   OSWORD 0 addr.lo
\  &AC  =                dump count, OSWORD 0 addr.hi
\  &AD                   dump width, OSWORD 0 length
\  &AE                               OSWORD 0 min
\  &AF                               OSWORD 0 max
\
\ *LIST <file>
\ ============
.FLIST
LDA #&FF                   :\ &FF=LIST

\ *TYPE <file>
\ ============
.TYPE                      :\ Entered with &00=TYPE
STA &AB:JSR OpeninFile     :\ Save list type, open file
LDX #0:BEQ type7           :\ Jump into loop
:
\ Type/List characters from file
\ ------------------------------
.type1
CLC:PHP:TAX:JSR OSWRCH:PLP
.type2
PHP:JSR OSBGET:BCS typeEOF :\ End of file
BIT &FF:BMI LBEED          :\ Escape pressed
PLP:BCC type3
PHA:JSR PrLineNumSpc:PLA
.type3
CMP #10:BEQ type4:CMP #13:BNE type1
.type4
CPX #10:BEQ type5:CPX #13:BNE type6
.type5
STX &AA:CMP &AA:CLC:BNE type2
.type6
TAX:JSR OSNEWL
.type7
LDA &AB:LSR A:BPL type2
.typeEOF
LDA &318:BEQ type10:JSR OSNEWL
.type10
PLP
.LBEDA
LDA #&00:JMP OSFIND


\ *DUMP <filename>
\ ================
.DUMP
JSR OpeninFile
LDA &30A:SBC &308        :\ Text window width
SBC #4:LSR A:LSR A:AND #&1C
CMP #4:BCS P%+4:LDA #3
STA &AD
:
\ Dump a line from file
\ ---------------------
.LBEED
BIT &FF:BMI LBF56        :\ Escape pressed, tidy up and quit
CLC:JSR LBFE4            :\ Print file offset
JSR PrSpace              :\ Print space
TSX:TXA:SEC:SBC &AD:TAX:TXS :\ Claim bytes on stack
LDA &AD:STA &AC             :\ Number of bytes to dump
:
\ Dump 8 bytes as hex
\ -------------------
.LBF04
JSR OSBGET:BCS LBF16
STA &101,X
JSR PrHex:JSR PrSpace    :\ Print hex, space
INX:DEC &AC:BNE LBF04
CLC:BEQ LBF2C
:
\ EOF met, pad with '**'
\ ----------------------
.LBF16
LDA #ASC"*":JSR OSWRCH
JSR OSWRCH:JSR PrSpace
LDA #&00:STA &101,X
INX:DEC &AC:BNE LBF16
SEC
:
\ Dump as characters
\ ------------------
.LBF2C
ROR &AB                :\ Save EOF flag in bit 7
LDX &AD:TXA            :\ Number of bytes to display
CLC:ADC &A8:STA &A8    :\ Update offset
BCC LBF30:INC &A9
.LBF30
PLA:JSR PrChar         :\ Print printable character
DEX:BNE LBF30
JSR OSNEWL
ROL &AB                :\ Check EOF flag
.DumpEOF
BCS LBEDA              :\ Close and finish
TYA:PHA:TAX            :\ Save handle, X=handle
LDA #127:JSR OSBYTE    :\ Read EOF
PLA:TAY                :\ Get handle back
CPX #1:BCC LBEED       :\ Not at EOF, loop for more
BCS DumpEOF            :\ At EOF, close and finish
:
\ Escape pressed
\ --------------
.LBF56
JSR LBEDA       :\ Close file
.errEscape
JSR L97B2       :\ Acknowledge Escape
JSR MkError:EQUB 17:EQUS "Escape":BRK


\ *BUILD <file>
\ =============
.BUILD
LDA #&80:JSR OpenFile  :\ Open file for output
STA &AA
:
\ Get a line of input
\ -------------------
.LBF69
JSR PrLineNumSpc
LDA #ASC" ":STA &AE
TSX:TXA:SBC #&40:STA &AD
LDY #&FF:STY &AF
INY:STY &AB
INY:STY &AC
DEY:TYA:LDX #&AB
JSR OSWORD:BCS LBF56
LDX #0:LDY &AA
.LBF8E
LDA &100,X:JSR OSBPUT
INX:CMP #13:BNE LBF8E
BEQ LBF69
:
.OpeninFile
LDA #&40                 :\ &40=OPENIN
.OpenFile
PHA                      
LDA #&00:STA &A8:STA &A9 :\ Line number=0
TYA:CLC:ADC &F2:TAX      :\ Convert (&F2),Y to XY
LDA &F3:ADC #&00:TAY
PLA:JSR OSFIND           :\ Open file
TAY:BNE OpenFileOk       :\ File found
.errFileNotFound
JSR MkError:EQUB 214:EQUS "File not found":BRK


\ *TUBE ON|OFF|<num>
\ ==================
.TUBE
LDA (&F2),Y:AND #&DF     :\ Get first character
CMP #ASC"O":BNE TubeNum  :\ Not *TUBE O, try for number
INY
LDA (&F2),Y:AND #&DF     :\ Get upper case
CMP #ASC"N":BEQ TubeOn   :\ *TUBE ON
CMP #ASC"F":BEQ TubeOff  :\ *TUBE OFF
DEY                      :\ Step back to error with non-number
.TubeNum
JSR ScanDec8             :\ Scan for number
OPT FNif(TARGET%<3)
  STA TUBEIO+6                    :\ Select Tube CPU on Electron or BBC
OPT FNendif
OPT FNif(TARGET%>2)
  TAX:PHP:SEI:LDA &FE34           :\ Disable IRQs, get current Tube
  EOR #&10:STA &FE34:STX TUBEIO+6 :\ Swap Tube, select Tube CPU
  EOR #&10:STA &FE34:STX TUBEIO+6 :\ Swap Tube back, select Tube CPU
  PLP                             :\ Restore IRQs
OPT FNendif
RTS
.TubeOn
.TubeOff
EOR #8:AND #8:ASL A:ASL A :\ Move ON/OFF to bit 5
EOR L0D6D:AND #&20        :\ Clear and merge TUBE bit
EOR L0D6D:STA L0D6D       :\ Should only do on non-Master
RTS


\ ********************
\ ROM Manager Commands
\ ********************

\ *LROMS (*)
\ ==========
.LROMS
LDA #1                :\ A=1 to lock
:
\ *UROMS (*)
\ ==========
.UROMS                :\ Entered with A=0 to unlock
TAX:TYA:PHA:TXA
TAY:JSR LockUnlockAll :\ Lock/unlock all ROMs
PLA:TAY               :\ Drop through to *ROMS
:
\ *ROMS (*)
\ =========
.ROMS
LDA (&F2),Y:CMP #ASC"*"
BEQ P%+3:CLC          :\ SEC=all ROMs
LDX #&0F:STX &F5      :\ Start at ROM 15
.L8C22
PHP
LDX &F5:JSR PrRomInfoAll :\ Display info for ROM X
BCS L8C2D             :\ Skip if nothing displayed
LDA #8:JSR OSWRCH     :\ Prevent line wrapping
JSR OSNEWL
.L8C2D
PLP:DEC &F5:BPL L8C22 :\ Loop for all ROMs
.OpenFileOk
RTS


\ *LANG (<rom>)
\ =============
\ Updates:
\ Doesn't enter selected language, just configures it.
\ If no <rom>, no default, allows MOS to select default
.LANG
JSR L8CA5              :\ Scan for ROM number
BCC P%+4:LDA #&FF      :\ If no <rom>, set no default
PHA:JMP Serv10SetLang  :\ Set as default language


\ Is ROM X unplugged?
\ -------------------
\ On exit, CC=ROM is inserted
\          CS=ROM is unplugged
.L8D07
JSR XtoBitmap:BCS L8D1A :\ Jump for ROM 8-15
AND L0D6E:BCC L8D1D     :\ Mask with bitmap for 0-7
.L8D1A
AND L0D6F               :\ Mask with bitmap for 8-15
.L8D1D
CMP #1:RTS              :\ CC=inserted, CS=unplugged
.XtoBitmap
TXA:CMP #8:AND #7:TAX
LDA Bitmap,X:RTS
.Bitmap
EQUB &01:EQUB &02:EQUB &04:EQUB &08
EQUB &10:EQUB &20:EQUB &40:EQUB &80


\ *SRPAGE <rom> <page> (I)(U)(L)
\ ==============================
\ Lock/Unlock doesn't make sense, as <rom> must be ROM anyway
\
.SRPAGE
JSR ScanDec4:STA &F5   :\ Scan for a short hex number
JSR SkipSpaces
JSR ScanDec4:PHA       :\ Scan for another short hex number
JSR srOptionsSpc:PHA   :\ Scan for options, returns %ULIQxxxX, corrupts X
\ AND #&80 BEQ skip JSR unlock
JSR RomTest            :\ Y=&00 for ROM, 'R' for RAM, 'E' for EEPROM
TYA:BEQ srPage1
.errBankWritable
JSR MkError:EQUB 138:EQUS "Bank is not ROM":BRK
.srPage1
LDX &F5:LDA #0
STA ROMTABLE,X         :\ Remove from ROM table
PLA:TAY                :\ Y='I' option
PLA:CLC:ADC #&96:TAX   :\ X=sub-bank select value - confirmed &96 not 96
PHP:SEI                :\ Stop IRQs while rebuilding ROM table
OPT FNif(TARGET%>2)
  LDA &FE34:PHA        :\ Get current 1MHz bus selection
OPT FNendif
TYA:PHA                :\ Save options
JSR RomPage            :\ Select sub-bank via stack
PLA                    :\ Get stacked options back
\ AND #&40 BEQ skip JSR lock
AND #&20               :\ Check 'I' option
BNE RebuildROMs        :\ Rebuild ROM table
BEQ AQRdone


\ *AQRPAGE <page>
\ ===============
.AQRPAGE
JSR ScanDec4:TAX     :\ Scan for a short hex number
PHP:SEI              :\ Stop IRQs while rebuilding ROM table
OPT FNif(TARGET%>2)
  LDA &FE34:PHA      :\ Get current 1MHz bus selection
  ORA #&20:STA &FE34 :\ Select cartridge bus
OPT FNendif
STX &FCFC            :\ Set paging register
.RebuildROMs
LDX #&0F             :\ Rebuild ROM table
.AQRlp
STX &F5:JSR L8D07    :\ Is it unplugged?
.AQRunplugged
LDA #0:BCS AQRstore  :\ Clear ROM table byte
LDX &F5
JSR ChkRomHeader     :\ Is there a ROM in the bank in &F5?
BCS AQRunplugged     :\ No header, clear ROM table byte
.AQRstore
LDX &F5:STA ROMTABLE,X :\ Store in ROM table
DEX:BPL AQRlp          :\ Step through all ROMs
.AQRdone
OPT FNif(TARGET%>2)
  PLA:STA &FE34        :\ Restore 1MHz bus selection
OPT FNendif
PLP:RTS                :\ Restore IRQs and return


\ *INSERT (*)(<rom>) (I)
\ *UNPLUG (*)(<rom>) (U)
\ ======================
\ Updates:
\ It is not an error to INSERT an inserted ROM.
\ Only inserts into ROM table if has a ROM header and (I) option.
\ Action is silent, no 'Press BREAK' message displayed.
\
\ On entry, A=0, (F2),Y=>parameters
\
.UNPLUG
LDA #&FF                 :\ A=&FF - UNPLUG
.INSERT
PHA                      :\ Save <ins/unp>
JSR L8CA0:PHP            :\ Scan for <rom>, save <rom>/<all> flag
STA &F5                  :\ Save <rom>
JSR srOptionsSpc:AND #&A0:\ Look for any options, %UxIxxxxx (corrupts X)
PLP:BEQ L8D94            :\ No <rom> or *, insert/unplug all ROMs
TAX:PLA:TAY:TXA:PHA      :\ Y=<ins/unp>, SP=>options
LDX &F5:JSR InsertUnplugX:\ Insert or Unplug this ROM
PLA                      :\ Get option %ULIQxxxx
.InsertOption
EOR #&20:BEQ InsertMe    :\ %xxIxxxxx - Insert
EOR #&A0:BNE InsertDone  :\ %Uxxxxxxx - Unplug
BEQ UnplugMe             :\ Remove me from ROM table
.InsertMe
JSR ChkRomHeader         :\ Check ROM header and get ROMTYPE
.UnplugMe
LDX &F5:STA ROMTABLE,X   :\ Insert or remove from ROM table
.InsertDone
RTS
:
\ Insert or unplug ROMs
\ --------------------------------
.L8D94
\ On entry, CC=*    - silent
\           CS=<cr> - prompt
\           A=options
\           SP=>ins/unp
TAX:PLA:TAY:TXA:PHA      :\ X=options, Y=ins/unp, SP=>options
LDX #&0F                 :\ Start at ROM 15
.InsUnpLoop
PHP:TYA:PHA              :\ Save silent flag, ins/unp
BCC InsUnpSilent         :\ Skip prompt if *INSERT/UNPLUG *
JSR L9030                :\ Print ROM info and prompt 'Y/N' (A,Y corrupted)
BCS InsUnpSkip           :\ Skip if 'N'
.InsUnpSilent
PLA:TAY:PHA              :\ Y=Insert/Unplug
STX &F5:JSR InsertUnplugX:\ Insert or Unplug this ROM, corrupts A,X,Y
TSX:LDA &103,X           :\ A=options
LDX &F5:JSR InsertOption :\ Deal with (I)(U) options
.InsUnpSkip
PLA:TAY:PLP              :\ Get ins/unp and silent flag back
DEX:BPL InsUnpLoop       :\ Loop down from 15 to 0
PLA                      :\ Drop options
RTS
:
\ Insert or Unplug a ROM
\ ----------------------
\ A=ROM, Y=&FF, unplug ROM
\ A=ROM, Y=&00, insert ROM
\
\ Update, do via OSBYTE 162
\
.InsertUnplug
TAX
.InsertUnplugX
JSR XtoBitmap            :\ A=2^X, CC=0-7, CS=8-15
INY:BNE InsertThisRom    :\ Y was &00, jump to insert
BCC P%+3:INY
ORA L0D6E,Y:STA L0D6E,Y  :\ Store into bitmap
RTS
.InsertThisRom
EOR #&FF:BCS P%+3:DEY
AND L0D6E,Y:STA L0D6E,Y  :\ Store into bitmap
RTS


\ *SRLOCK (<rom>)
\ ===============
.SRLOCK
LDA #1              :\ A=1 to lock
:
\ *SRUNLOCK (<rom>)
\ =================
.SRUNLOCK           :\ Entered with A=0 to unlock
PHA:JSR L8CA0       :\ Save lock/unlock flag, scan <rom> to A
BNE P%+3:SEC        :\ No <rom> given, lock/unlock all ROMs
TAX:PLA:TAY         :\ X=<rom>, Y=lock/unlock flag
BCC LockUnlockROM   :\ <rom> given, lock/unlock that ROM
                    :\ No <rom> given, drop into lock/unlocal all
:
\ Lock/Unlock all ROMs, Y=lock/unlock
\ -----------------------------------
.LockUnlockAll
LDX #15
.LockUnlockLp
TXA:PHA:JSR LockUnlockROM
PLA:TAX:DEX:BPL LockUnlockLp
RTS

\ Lock/Unlock ROM X, Y=0 unlock, Y=1 lock
\ ---------------------------------------
.LockUnlockROM
TYA
.LockUnlockROM1
EOR LockAddrs,X      :\ Get lock address for this ROM
BPL LockUnlockDone   :\ <&80=no lock register
TAX                  :\ X=offset to lock register
OPT FNif(TARGET%>2)
  LDA &FE34:PHA      :\ Get current 1MHz bus selection
  ORA #&20:STA &FE34 :\ Select cartridge bus
OPT FNendif
STA &FC00,X          :\ write to lock register
OPT FNif(TARGET%>2)
  PLA:STA &FE34      :\ Restore 1MHz bus selection
OPT FNendif
.LockUnlockDone
RTS
.LockAddrs
EQUB &DC:EQUB &DE:EQUB &DC:EQUB &DE   :\ 0,1,2,3
EQUB &00:EQUB &D8:EQUB &D8:EQUB &00   :\ 4,5,6,7
EQUB &00:EQUB &00:EQUB &00:EQUB &00   :\ 8,9,10,11
EQUB &00:EQUB &DA:EQUB &00:EQUB &DA   :\ 12,13,14,15


\ Print character in A in inverted colours
\ ----------------------------------------
.L9002
PHA
LDA #&00:JSR L9018  :\ COLOUR 0
LDA #&87:JSR L9018  :\ COLOUR 128+7
PLA:JSR OSWRCH
LDA #&07:JSR L9018  :\ COLOUR 7
LDA #&80            :\ COLOUR 128+0
.L9018
PHA
LDA #&11:JSR OSWRCH :\ VDU 17 - COLOUR
PLA:JMP OSWRCH      :\ Colour number

\ Display ROM info and Prompt Y/N
\ -------------------------------
\ On entry, X=ROM
\ On exit, CS='N', CC='Y'
\          A,Y corrupted
\          X preserved
.L9030
TXA:PHA:JSR PrRomInfo :\ Print information on ROM X
BCS L9062             :\ ROM is empty
LDA #8:JSR OSWRCH
PLA:TAX
:
\ Prompt Y/N
\ ----------
.L9035
TXA:PHA
JSR PrText:EQUS "? Y/N":EQUB 0
.L903F
JSR OSRDCH:BCS X9027  :\ Escape
AND #&DF
CMP #ASC"Y":BEQ L9056
CMP #ASC"N":BNE L903F
.L9056
PHA:JSR PrText:EQUB 127:EQUB 127:EQUB 127:EQUB 0
PLA:PHA
JSR OSWRCH:JSR OSNEWL
PLA:EOR #1:LSR A      :\ CS='N', CC='Y'
.L9062
PLA:TAX:RTS
.X9027
JMP errEscape         :\ Jump to Escape error


\ Print ROM X information
\ =======================
\ Updates:
\ Doesn't try to display information on empty ROMs
\ Displays unplugged ROMs so *INSERT<cr> gets all ROMs
\
\ On exit, CS=nothing displayed, ROM empty, not RAM, not EEPROM
\          CC=something displayed, occupied, or RAM, or EEPROM
.PrRomInfo
CLC
.PrRomInfoAll
PHP:STX &F5:JSR ChkRomHeader  :\ CLC=Ok, A=type; SEC=empty
PHA:PHP                       :\ stack => romtype, header
OPT FNif(TARGET%=0)
  CMP #&60:BNE RomInfo0        :\ ROM is not BASIC
  LDX &F5:CPX #10:BNE RomInfo0 :\ Not ROM 10 is not BASIC
  PLP:BCC RomInfoDup:PHP       :\ ROM 10 is BASIC, duplicate of ROM 11
  .RomInfo0
OPT FNendif
JSR RomTest               :\ Y=&00 for ROM, 'R' for RAM, 'E' for EEPROM
PLP:BCC PrRomInfo1        :\ CLC, ROM header exists
TYA:BNE PrRomInfo1        :\ Y<>0, SRAM or EEPROM
.RomInfoDup
PLA:TAX:PLP:BCS RomInfo2  :\ List all ROMs
SEC:RTS                   :\ No ROM header, no SRAM/EEPROM

\ stack=> romtype, Cy=ROM header, Y=SRAM
.PrRomInfo1
PLA:TAX                   :\ X=romtype, Cy=header, Y=sram
PLA                       :\ Drop 'all ROMs' flag
.RomInfo2
PHP                       :\ stack => header
TYA:PHA                   :\ stack => sram, header
TXA:PHA                   :\ stack => romtype, sram, header
:
JSR PrText:EQUS "ROM ":EQUB 0
LDX &F5:TXA:JSR PrNybble
JSR PrSpace
LDA L0D6D:AND #&8F
CMP &F5:BNE RomInfo3      :\ Not default language
LDA #ASC"*":JSR L9002     :\ Print inverted '*'
BNE RomInfo4
.RomInfo3
LDA #ASC":":JSR OSWRCH
.RomInfo4
JSR PrText:EQUS " (":EQUB 0
JSR L8D07:BCC RomInfo5      :\ Not unplugged
PLA:LDA #ASC"U":JSR L9002   :\ Print inverted 'U'
JSR PrSpace:BNE RomInfo6
.RomInfo5
LDY #ASC"S":PLA:PHA:JSR PrCharY
LDY #ASC"L":PLA:ASL A:JSR PrCharY
.RomInfo6
PLA:BEQ RomInfo7            :\ ROM
JSR L9002:BNE RomInfo8      :\ Print inverted 'R' or 'E'
.RomInfo7
JSR PrSpace
.RomInfo8
JSR PrText:EQUS ") ":EQUB 0
PLP:BCS L917C               :\ No ROM header present
:
LDA #&08:STA &F6       :\ Point to before ROM title at &8009
LDA #&80:STA &F7
.L914A
JSR RdRomNext          :\ Read next byte from ROM
CMP #&00
BNE P%+4:LDA #ASC" "   :\ Convert &00 to space
CMP #ASC" ":BCC L914A  :\ Control code - skip
CMP #ASC"(":BEQ L917C  :\ End display at (C) string
.L915C
LDY &0318:BEQ L917C    :\ X position=0, finish
.L916D
JSR OSWRCH             :\ Print character
.L9170
JMP L914A
.L917C
CLC:RTS                :\ CLC=occupied or empty+sram/eeprom

.ChkRomHeader
LDA #&05:STA &F6       :\ Point to before ROM type byte &8006
JSR RdRom80:PHA        :\ Save ROM type byte
JSR RdRomNext          :\ Get copyright offset from &8007
STA &F6:JSR RdRom
CMP #&00:BNE ChkRomHdrDone
JSR RdRomNext
CMP #ASC"(":BNE ChkRomHdrDone
JSR RdRomNext
CMP #ASC"C":BNE ChkRomHdrDone
JSR RdRomNext
CMP #ASC")":BNE ChkRomHdrDone
PLA:CLC:RTS            :\ CLC=ok, A=ROM type
.ChkRomHdrDone
PLA:LDA #0             :\ Fake ROM type to be &00
SEC:RTS                :\ SEC=no header
.RdRom80
LDA #&80:STA &F7
.RdRomNext
INC &F6
.RdRom
LDY &F5:JMP &FFB9


\ ***************************
\ ROM load/save/wipe commands
\ ***************************

\ *SAVEROM <afsp> <rom>
\ *RSAVE   <afsp> <rom>
\ *SRSAVE  <afsp> <start> <end> <rom>
\ *RLOAD   <afsp> <rom> (I) (L) (P) (Q) (R) (U)
\ *LOADROM <afsp> <rom> (I) (L) (P) (Q) (R) (U)
\ *SRLOAD  <afsp> <start> <rom> (I) (L) (P) (Q) (R) (U)
\ *ZERO    <rom>  (I) (L) (P) (Q) (R) (U)
\ *SRWIPE  <rom>  (I) (L) (P) (Q) (R) (U)
\ ===========================================
\ <addr> <end> parameters not implemented
\
\ *SRWIPE <rom> (U) (L)
\ =====================
.SRWIPE
LDA #&40:PHA          :\ Stack <wipe>
JSR ScanDec4          :\ Scan <rom>
OPT FNif(VALver$<1.337)
 TAX
OPT FNendif
CLC:BCC srWipeRom     :\ CLC=write zeros

.srSyntax
JSR MkError:EQUB 204:EQUS "Bad filename":BRK
.errRomLocked
JSR MkError:EQUB 135:EQUS "Bank not writable":BRK

.SRLOAD
LDA #&FF              :\ &FF=load
.SRSAVE               :\ Enters with &00=save
PHA:TYA:CLC           :\ Save load/save flag
ADC &F2:STA FILEBLK+0 :\ Point to filename
LDA #0
ADC &F3:STA FILEBLK+1
CLC:JSR GSINIT        :\ Use GSREAD to step past filename
BEQ srSyntax          :\ No parameters
.srskip
JSR GSREAD:BCC srskip :\ Step past filename and trailing spaces
OPT FNif(VALver$<1.337)
 JSR SkipSpaces        :\ Now pointing to <addr> or <rom>
 .srgetrom
 JSR ScanDec4:TAX      :\ Scan <rom>
 .srgetplus
 JSR SkipSpaces
 JSR CheckDigit
 DEY:BCC srgetrom      :\ Another digit, keep reading as <rom>
 INY:INY:CMP #ASC"+"
 BEQ srgetplus:DEY     :\ Step past '+' as well
OPT FNelse
 .srgetnum
 TYA:PHA:DEY           :\ Save current parameter
 .srgetlp1
 INY
 .srgetlp2
 JSR CheckDigit:BCC srgetlp2 :\ Step past digits
 JSR SkipSpaces
 CMP #ASC"+":BEQ srgetlp1    :\ Step past '+' as well
 JSR CheckDigit:BCS srgetok  :\ Found the <rom>
 PLA:DEY:BCC srgetnum        :\ Loop to next param
 .srgetok
 PLA:TAY:JSR ScanDec4        :\ Get the <rom>
OPT FNendif

.srWipeRom
OPT FNif(VALver$<1.337)
 TXA
OPT FNendif
PHA:PHA               :\ Stack padding for <options>, stack <rom>
:
\ Now pointing to any trailing options or <cr>
OPT FNif(VALver$<1.337)
 DEY:JSR srOptions    :\ Scan trailing options
OPT FNelse
 JSR srOptionsSpc     :\ Scan trailing options
OPT FNendif
TSX:STA &102,X        :\ Save options on stack
\
\ Stack holds  <rom>, <options>, <&FF=load/&00=save/&40=wipe>
\
\ Check if <rom> is writable before we change MODE or attempt to load file
ASL A               :\ Move (U)nlock option to Carry
LDA &103,X          :\ Get action
BEQ srPrecheck3     :\ &00=save, don't check if writable
PLA:PHA:STA &F5     :\ Get <rom>, set &F5=<rom>
EOR &F4             :\ Compare to myself (preserve Cy)
BEQ errRomLocked    :\ Can't write to myself
PHP:BCC srPrecheck1 :\ No (U)nlock option
LDX &F5:LDY #0      :\ X=<rom>, Y=unlock
JSR LockUnlockROM   :\ Unlock this ROM
.srPrecheck1
JSR RomTest         :\ Check ROM type in bank &F5
DEY:BMI errRomLocked:\ Not SRAM or EEPROM
PLP:BCC srPrecheck2 :\ Wasn't (U)nlocked, so don't relock
LDX &F5:LDA #1      :\ X=<rom>, A=lock
JSR LockUnlockROM1  :\ Relock this ROM
.srPrecheck2
TSX
:
LDA &103,X             :\ Get load/save/wipe action
.srPrecheck3
PHA:CMP #&40:BEQ P%+5  :\ Skip if *Wipe
JSR CheckMode6         :\ Force to MODE 6
:
LDX #&80:LDY #&20      :\ Prepare for copy &8000->&2000
PLA:SEC:BEQ srCopyData :\ Jump forward with &00=save
CLC:BPL srWriteRom     :\ Jump forward with <&80=wipe
JSR srFile:SEC         :\ Load <file>, SEC=Copy data
\ Note, assume we lose &F5 through external call to OSFILE
\
.srWriteRom
PLA:TAX:STX &F5        :\ X=ROM, also save in &F5
LDA #0:STA ROMTABLE,X  :\ Remove from ROM table before overwriting
TAY:PLA:PHA            :\ Y=0, check options
BPL srWriteNoUnlock    :\ b7=0, don't unlock
PHP:JSR LockUnlockROM:PLP :\ Unlock this ROM, preserving Carry
.srWriteNoUnlock
LDX #&20:LDY #&80      :\ Prepare for copy &2000->&8000
LDA &F5:PHA            :\ Get ROM number back
.srCopyData
PLA:JSR RomCopy        :\ Copy data to/from selected <rom>
\
\ Stack now holds <options>, <load/save>
\
PLA:ASL A:PHA:BPL srNoLock :\ b6=0, don't lock
LDX &F5:LDA #1
JSR LockUnlockROM1         :\ Lock this ROM
.srNoLock
PLA:ASL A:BPL srNoInsert   :\ b5=0, don't insert
JSR ChkRomHeader:BCS srNoInsert
LDX &F5:STA ROMTABLE,X     :\ Store ROM type if valid header
.srNoInsert
PLA:BEQ srFile             :\ A=<load/save>, if &00, save copied ROM data
.srDone
RTS
:
.srFile
PHA:LDX #15
.srFileLp
LDA srBlock,X:STA FILEBLK+2,X
DEX:BPL srFileLp
PLA:PHA:BMI srFileGo   :\ Jump to do Load
LDA #&80:STA FILEBLK+3 :\ Load address=&FFFF8000
LDA &2006              :\ Get ROM type byte
ASL A:BPL srFileNoLang :\ No language
SEC:LDY #2             :\ Prepare for no reloc address
AND #&40:BEQ srsavelp2 :\ No relocation address, use &00008000
LDX &2007              :\ Offset to (C)
.srsavelp1
INX:LDA &2000,X:BNE srsavelp1   :\ Step past (C) message
CLC:LDY #0
.srsavelp2
BCS P%+5:LDA &2001,X            :\ Get Tube address
STA FILEBLK+2,Y:STA FILEBLK+6,Y :\ Copy to control block
INX:INY:TYA:AND #4:BEQ srsavelp2
.srFileNoLang
.srFileGo
LDX #FILEBLK AND 255
LDY #FILEBLK DIV 256
PLA:JMP OSFILE
.srBlock
EQUD &FFFF2000
EQUD &FFFF8000        :\ Low byte=&00 for load to address
EQUD &FFFF2000
EQUD &FFFF6000
:
\ Scan SRAM command options
\ -------------------------
\ (F2),Y=>any trailing options or <cr>
\ On return, b7 downwards -> ULIQxxxX
.srOptionsSpc
JSR SkipSpaces
.srOptions
LDA #0:PHA            :\ Stack 'no options'
LDA (&F2),Y           :\ Get first option
.OptionLp1            :\ <cr> will fall through and set b0
AND #&DF:LDX #7
.OptionLp2
CMP Options,X:BEQ OptionMatch
DEX:BNE OptionLp2
.OptionMatch
PLA:ORA Bitmap,X:PHA
JSR SkipSpaces1
CMP #13:BNE OptionLp1
PLA:RTS               :\ Return A=<options>
.Options
EQUS "....QILU"       :\ b0...b7, b0=no options at all
:
\ Select sub-bank in ROM in &F5, X=page select
\ --------------------------------------------
.RomPage
LDA #RomPageEnd-RomPageStart            :\ Length of stacked code
LDY #(RomPageEnd-RomCopyStart-1)AND255  :\ Offset to end of stacked code
BNE StackCopySetupY                     :\ Jump to stack it and call it
:
\ Test if ROM in &F5 is SRAM
\ --------------------------
.RomTest
LDA #RomTestEnd-RomTestStart            :\ Length of stacked code
LDY #(RomTestEnd-RomCopyStart-1)AND255  :\ Offset to end of stacked code
BNE StackCopySetup                      :\ Jump to stack it and call it
:
\ Copy between main RAM and SROM/SRAM
\ -----------------------------------
.RomCopy
\ CC=zero data, CS=copy data
\ X=source page, Y=dest page, A=rom
STA &F5                 :\ ROM to copy to/from
STX &A9:STY &AB         :\ Set source and dest
LDA #&40:STA &AC        :\ Number of pages to copy
LDA #RomCopyEnd-RomCopyStart           :\ Length of stacked code
LDY #(RomCopyEnd-RomCopyStart-1)AND255 :\ Offset to end of stacked code
.StackCopySetup
LDX #0
.StackCopySetupY
STX &AD                      :\ Entry value for Y
TSX:STX &AA                  :\ Save old stack pointer
TAX                          :\ X=length of code to stack
PHP:SEC:SBC #9:STA &A8:PLP   :\ Save offset to RomSelect code
.StackCopyLp
LDA RomCopyStart,Y:PHA       :\ Copy code to stack
DEY:DEX:BNE StackCopyLp
LDA &AA:PHA                  :\ Stack old stack pointer
TSX                          :\ X=>entry address on stack
PHP:TXA:CLC:ADC &A8:PLP      :\ Calculate address of RomSelect code
STA &104,X                   :\ Adjust JSR destination
PHP:SEI                      :\ Stop IRQs from calling while we fiddle with ROMs
INX:JSR RomStackDispatch     :\ Call the code on the stack
PLP:PLA:TAX:TXS              :\ Restore IRQs, restore stack
RTS
:
\.RomCopyDispatch
.RomStackDispatch
LDA #&01:PHA            :\ Push stack address to jump to
TXA:PHA
LDY &AD:STY &A8:STY &AA :\ Set up entry values
LDX &F5:LDA &F4
RTS                     :\ Jump to code on stack

\ Routine copied to stack to copy data
\ ------------------------------------
\ CC=zero data, CS=copy data
\ A=old ROM, X=ROM to select, Y=0, (&A8)=src, (&AA)=dest, (&AC)=page count
.RomStackStart
.RomCopyStart
PHA:JSR &100          :\ Select SRAM/SROM bank
TYA                   :\ Prepare A=0 for wipe
.RomCopyLp1
LDX #&40              :\ Write 64 bytes at a time for EEPROM
.RomCopyLp2
BCC P%+4:LDA (&A8),Y  :\ CC=use zero, CS=fetch byte
STA (&AA),Y           :\ Store byte
INY:DEX:BNE RomCopyLp2
DEY:PHP               :\ Save Carry
.RomCopyCheck
CMP (&AA),Y           :\ Check last byte written
\ to do, this needs to explicitly check if bit 6 is toggling, not check for equality
\ a locked EEPROM will toggle, but then return original data, resulting in a fixed loop
\ Can return to caller Y=0 for Ok, or Y=63 for failed
BNE RomCopyCheck      :\ Wait for data to settle
PLP                   :\ Restore Carry
INY:BNE RomCopyLp1    :\ Loop for 256 bytes
INC &A9:INC &AB       :\ Increment addresses
DEC &AC:BNE RomCopyLp1:\ Loop until all done
PLA:TAX               :\ First 4 bytes and last 13 bytes
.RomCopySelect        :\  are the same in both routines
STX &F4
LDA #&0C:STA ROMSEL
STX ROMSEL:RTS        :\ 49 bytes
.RomCopyEnd

\ Routine copied to stack to test for sideways RAM
\ ------------------------------------------------
\ A=old ROM, X=ROM to select
\ Returns Y=&00, 'R', 'E'
.RomTestStart
PHA:JSR &100                 :\ Select SRAM/SROM bank
LDA &8008:EOR #&AA:STA &8008 :\ Modify version byte
CMP &AAA2                    :\ Wait for floating bus to settle
CMP &8008:PHP                :\ EQ=RAM, NE=ROM/EEPROM/empty
EOR #&AA:STA &8008           :\ Restore byte
.RomTestLp
LDA &8008:EOR &8008:BEQ RomTestOk :\ Bytes match
\ If empty socket, Cx EOR Cx -> 0x  %00xxxxxx
\ If EEPROM      , Cx EOR 8x -> 4x  %x1xxxxxx
ASL A:BPL RomTestOk          :\ Empty socket, bit 6 not toggling
LDY #ASC"E":BNE RomTestLp    :\ Toggling, must be EEPROM/empty
.RomTestOk
PLP:BNE RomTestNotRam        :\ NE from earlier, ROM or EEPROM or empty
LDY #ASC"R"                  :\ EQ from earlier, must be RAM
.RomTestNotRam
PLA:TAX
.RomTestSelect
STX &F4
LDA #&0C:STA ROMSEL
STX ROMSEL:RTS               :\ 52 bytes
.RomTestEnd

\ Routine copied to stack to select sub-banks
\ -------------------------------------------
\ A=old ROM, X=ROM to select, Y=paging value
.RomPageStart
PHA:JSR &100                 :\ Select SRAM/SROM bank
STY &AFFF:STY &AFFF:STY &AFFF:\ Select sub-bank
PLA:TAX
.RomPageSelect
STX &F4:LDA #12:STA ROMSEL
STX ROMSEL:RTS               :\ 26 bytes
.RomPageEnd


\ *************
\ Disk Commands
\ *************

\ *FORMAT <drv> <S|M|L> (Y)
\ =========================
.AFORMAT
JSR L97E9:PHA           :\ Check ADFS, get drive number, A=0/1, X=0-F drive number
JSR SkipSpaces:AND #&DF :\ Look for disk size
CMP #ASC"S":BEQ Format2
CMP #ASC"M":BEQ Format2
CMP #ASC"L":BEQ Format2
JSR MkError:EQUB 148:EQUS "Bad size":BRK
:
.Format2
PHA:TXA:PHA            :\ stack => physical drive, size, logical drive
JSR SkipSpaces1        :\ Look for final optional 'Y'
AND #&DF:CMP #ASC"Y"
PHP:BEQ Format3        :\ If 'Y', don't prompt for confirmation
JSR PrText
EQUS "Format drive ":EQUB 0
TXA:JSR PrNybble
JSR CheckEnabled
:
.Format3
\ X=physical drive, stack => (Y), physical drive, size, logical drive
JSR NMIClaim           :\ *FX143,12,255 - claim NMIs
LDA #&00:STA FDCdrive  :\ Write &00 RESET to drive control register
TAY:TAX
.X9A96
DEY:BNE X9A96          :\ Delay for while FDC resets
DEX:BNE X9A96
TSX:LDA &104,X         :\ Get drive number
LDX #&00:JSR X93D1     :\ Write to drive register, noRES+SIDE0+DRIVE
LDA #&07:JSR X93E0     :\ FDC command 'Restore', seek to Track 0
PLP:BEQ Format11       :\ 'Y' option given, don't prompt to overwrite
AND #&10:BNE Format11  :\ Sector Not Found - disk is unformatted
JSR NMIRelease         :\ Release NMIs
JSR PrText
EQUS "Already formatted. Format":EQUB 0
JSR CheckEnabled
JSR NMIClaim           :\ *FX143,12,255 - claim NMIs
LDA #&07:JSR X93E0     :\ Spin the disk up again
:
\ *FORMAT enabled, format existing disk enabled, NMI claimed, all ready to go
\ stack => physical drive, size, logical drive
.Format11
PLA:STA L0935                :\ Store physical drive number
LDX #80:LDY #1               :\ 80 tracks, 1+1 sides
PLA:CMP #ASC"L":BEQ Format12 :\ Large =80x2
DEY:CMP #ASC"M":BEQ Format12 :\ Medium=80x1
LDX #40                      :\ Small =40x1
.Format12
STX L0932:STY L0931          :\ &932=tracks, &931=sides-1
PLA:STA L0930                :\ &930=logical drive number 0/1
LDA #&00:STA L0938           :\ Set to side 0
:
\ Now moved to FILEBLK
\ &930=logical drive number        
\ &931=sides-1                     
\ &932=tracks                      
\ &933=old NMI owner               
\ &934=
\ &935=physical drive number
\ &936=physical drive number as ASCII for *MOUNT, etc
\ &937=
\ &938=current side
\ &939=bottom of memory low byte
\ &93A=bottom of memory high byte
\ &93B=current track
\ &93C=logical sector number
\ &93D=
\ &93E=modified track number, track+8 if odd track
\ &93F=physical sector number
:
JSR CheckMode
JSR L97B4:STX L0939          :\ OSBYTE &83 - read top of user memory
TYA:SEC:SBC #&1A:STA L093A   :\ Use 6.5K of memory below screen
:
.Format13
JSR PrText
EQUS "Formatting ":EQUB 0
JSR PrPreTrack               :\ Print drive,track
:
.L9338
LDA FDCstatus         :\ Read FDC status
ROR A:BCS L9338       :\ Loop until FDC not BUSY
\
\ Note, FDCstatus in A register is now rotated right
\ So, must test for status DIV 2
\
AND #&20:BEQ L935C    :\ Not WriteProtected
OPT FNif(TARGET%<0)
  BNE L935C           :\ Ignore WriteProtected
OPT FNendif
JSR NMIRelease
JSR MkError:EQUB 201:EQUS "Disk read only":BRK
.FormatEscape
JSR NMIRelease
JMP errEscape

\ FDC ready, writable, and disk spinning
\ --------------------------------------
.L935C
LDA #&00:STA L093B    :\ current track=0
.L9360
BIT &FF:BMI FormatEscape  :\ Escape pressed
JSR X9567             :\ Print track number, build image, write to disk
INC L093B:LDA L093B   :\ Increment track
CMP L0932:BNE L9389   :\ Compare with number of tracks, jump if not done
DEC L0931:BMI L939A   :\ Decrement number of sides, jump if all done
LDA #&00:JSR X93E0    :\ Clear FDC command register
INC L0938             :\ Increment side number
JSR X93D0             :\ Write to drive control register, select side 1
JMP L9338             :\ Jump back to format from track 0

\ Prepare to do next track
\ ------------------------
.L9389
LDA FDCstatus         :\ Read FDC status
ROR A:BCS L9389       :\ Loop until not BUSY
LDA #&53              :\ &53=StepToNext, u=update, h=no spin, v=no verify, speed=3
JSR X93E0             :\ Step to next track
JMP L9360             :\ Jump back to write next track

\ All done
\ --------
.L939A
JSR OSNEWL
.L93A8
LDA FDCstatus         :\ Read FDC status
ROR A:BCS L93A8       :\ Loop until not BUSY
LDA #&00:JSR X93E0    :\ Clear FDC command register
JSR NMIRelease        :\ Release NMIs
:
\ Write padding file if early ADFS version
\ ----------------------------------------
LDA L0936:ORA #ASC"4":PHA :\ Save ASCII floppy drive number for later
LDA #&08:STA &F6      :\ Point to version number
LDA #&80:STA &F7
LDY &0DBC:JSR &FFB9   :\ Read from current filing system ROM
CMP #0:BNE X9A34      :\ Not &00, no need for padding file
:
JSR PrText
EQUS "Writing ADFS 1.00 ZYSysHelp":EQUB 0
]:cmdLen=1:cmdBuf=&B00:IF(opt%AND2):cmdLen=X9A59-X9A39:cmdBuf=&B00-cmdLen
[OPT opt%
LDX #cmdLen-1
.X9A0F
LDA X9A39,X:STA cmdBuf,X :\ Copy commands to top of page A
DEX:BPL X9A0F
PLA:PHA                  :\ Get ASCII drive number
STA cmdBuf+&05           :\ Store in '*DIR'
STA cmdBuf+&0D           :\ Store in '*SAVE'
STA cmdBuf+&28           :\ Store in '*ACCESS'
LDX #(cmdBuf AND 255)+0
JSR X9980                :\ Do '*DIR'
LDX #(cmdBuf AND 255)+7
JSR X9980                :\ Do '*SAVE'
LDX #(cmdBuf AND 255)+&20
JSR X9980                :\ Do '*ACCESS'
JSR OSNEWL
.X9A34
PLA                      :\ Mount the drive and finish
\ Could finish by verifying the drive
:
\ Mount drive in A
\ ----------------
.X9975
TAY:LDX #7
.X9978
LDA X9A59,X:STA &00A8,X    :\ Copy command to &A8-&AF
DEX:BPL X9978
STY &AE                    :\ Store ASCII drive number
LDX #&A8:LDY #0            :\ Do '*MOUNT'
LDA #3:JMP (FSCV)          :\ Pass '*MOUNT' to filing system
.X9980
LDY #&0A:JMP OS_CLI        :\ Do command in page &A

.X9A39
EQUS "DIR :x":EQUB 13
EQUS "SAVE :x.ZYSysHelp 0+38F0":EQUB 13
EQUS "ACCESS :x.ZYSysHelp L":EQUB 13
.X9A59
EQUS "MOUNT x":EQUB 13
.X9A69

\ Create image of track data in memory, then write to disk
\ --------------------------------------------------------
.X9567
LDA L0939:STA LAE+0    :\ LAE/F=>bottom of data buffer
LDA L093A:STA LAE+1
LDA #&08
JSR OSWRCH:JSR OSWRCH  :\ Print two backspaces
LDA L0938:LSR A        :\ Side
LDA L093B              :\ Track
BCC P%+4:ADC #79       :\ Add 80 for side 1
JSR PrHex              :\ Print track number
JSR L9433              :\ Create track image in memory
.X9585
LDA FDCstatus          :\ Read FDC status
ROR A:BCS X9585        :\ Loop until FDC not busy
LDA L0939:STA LAC+0    :\ LAC/1=>bottom of memory
LDA L093A:STA LAC+1
:
\ Write track data
\ ----------------
.X99A7
OPT FNif(TARGET%>-1)
  SEI:LDY #&00
  .X99AE
  LDA FDCstatus:AND #&21  :\ Read FDC Spin+Busy status
  CMP #&20:BNE X99AE      :\ Not spun up, loop until spinning
  LDA #&F4:STA FDCcommand :\ Write FDC command &F4=Write track, h=spin, e=no delay
  LDY #&9
  .X99EF
  DEY:BNE X99EF           :\ Delay
  .X99C6
  LDA (LAC),Y             :\ Get byte from track data
  CMP #&FF:BEQ X99EC      :\ &FF=end of data
  TAX                     :\ X=data to write
  .X99CD
  LDA FDCstatus
  AND #&02:BEQ X99CD      :\ Loop until DataRequest
  STX FDCdata             :\ Write data
  INY:BNE X99C6           :\ Loop for 256 bytes
  INC LAC+1:BNE X99C6     :\ Loop for next 256 bytes
  .X99EC
  CLI
OPT FNendif
:
.X959A
LDA FDCstatus          :\ Read FDC status
ROR A:BCS X959A        :\ Loop until FDC not busy
ROL A:RTS              :\ Return result in A

\ Write command A to FDC, return result in A
\ ------------------------------------------
.X93E0
SEI:STA FDCcommand  :\ Write to FDC command register
LDY #&09
.X93EB
DEY:BNE X93EB       :\ Delay for 9 loops
CLI:BEQ X959A

\ Select drive and side
\ ---------------------
.X93D0
LDA L0930             :\ Get current drive
LDX L0938             :\ Get current side
.X93D1
BEQ P%+4:ORA #fdcSIDE :\ If side 1, OR with SIDE
CLC:ADC #1            :\ Convert to drive select bitmap
ORA #fdcRES           :\ OR with noRESET
STA FDCdrive:RTS

\ Create a track in memory
\ ------------------------
.L9433
LDA #&4E:LDX #&3C:JSR X95AF  :\ Fill &3C x &4E byte
LDX #&00                     :\ Start at physical sector 0
.L943C
STX L093F:JSR L9459          :\ Create sector X
LDX L093F:INX                :\ Increment sector
CPX #&10:BNE L943C           :\ Loop for 16 sectors
LDA #&FF                     :\ Write terminating &FF byte

\ Fill memory with track data
\ ---------------------------
.X95AD
LDX #&01            :\ Fill one byte of memory
.X95AF
LDY #&00
STX L093E           :\ Number of bytes to store
LDX #&00
.X95B6
STA (LAE),Y:INC LAE+0
BNE X95BE:INC LAE+1
.X95BE
INX:CPX L093E:BNE X95B6
RTS

\ Fill a sector with fill byte
\ ----------------------------
JSR L9452
.L9452
LDA #&4E                     :\ Fill byte &4E
.L9454
LDX #&00:BEQ X95AF           :\ Fill with 256 bytes

\ Create a single sector image
\ ----------------------------
.L9459
LDA #&00:LDX #&0C:JSR X95AF  :\ 12 bytes of &00
LDA #&F5:LDX #&03:JSR X95AF  :\  3 bytes of &F5
LDA #&FE:JSR X95AD           :\  1 bytes of &FE - ID start flag
LDA L093B:JSR X95AD          :\ current track
LDA L0938:JSR X95AD          :\ current side
LDA L093B:ROR A:PHP          :\ current track
ROL A:PLP:BCC L9483:ADC #&07 :\ track+8 for odd tracks
.L9483
STA L093E
CLC:LDA L093F:ADC L093E      :\ Physical sector+track offset
AND #&0F:STA L093C           :\ Logical sector number
JSR X95AD                    :\ logical sector
LDA #&01:JSR X95AD           :\ &01 = sector size=256
LDA #&F7:JSR X95AD           :\ &F7 - tell FDC to generate a CRC
LDA #&4E:LDX #&16:JSR X95AF  :\ 22 bytes of &4E
LDA #&00:LDX #&0C:JSR X95AF  :\ 12 bytes of &00
LDA #&F5:LDX #&03:JSR X95AF  :\  3 bytes of &F5
LDA #&FB:JSR X95AD           :\  1 byte of &FB - data start flag
:
LDA L0938:ORA L093B          :\ Check track and side
BEQ L94C4                    :\ If track 0, side 0, fill with root data
.L94C1
JMP L9556                    :\ Jump to fill with empty sector

\ Fill sectors on track 0 with root data
\ --------------------------------------
.L94C4
LDA L093C                    :\ Logical sector number
CMP #&07:BCS L94C1           :\ End of track 0, normal blank sector
PHA:LDA #&00:JSR L9454       :\ Fill sector with &00
DEC LAE+1                    :\ Step back to start of sector
PLA     :BEQ L950F           :\ Sector 0 - FSM starts
CMP #&02:BCC L9523           :\ Sector 1 - FSM lengths
         BEQ L9547           :\ Sector 2 - start of '$'
CMP #&06:BCS X94E7           :\ Sector 6 - end of '$'
         JMP X9732           :\ Sector 3-5 - middle of '$'

\ Sector 0 - Free Space Map starts
\ --------------------------------
.L950F
LDY #&00            
LDA #&07:STA (LAE),Y         :\ Free space starts at &000007
JSR X9712                    :\ Get disk size in sectors to &XXAA
LDY #&FC:STA (LAE),Y         :\ Store total number of sectors
TXA:INY:STA (LAE),Y
BNE X9727                    :\ Jump forward to calculate checksum

\ Sector 1 - Free Space Map lengths
\ ---------------------------------
.L9523
JSR X9712:LDY #0             :\ Get disk size in sectors to &XXAA
SEC:SBC #&07:STA (LAE),Y     :\ Free space length = size-7
TXA:SBC #&00            
INY:STA (LAE),Y:LDY #&FB
LDA &240                     :\ Get random-ish value from countdown timer
STA (LAE),Y:INY              :\ &FB=DiskID
LDA &295                     :\ Get random-ish value from TIME
STA (LAE),Y                  :\ &FC=DiskID
LDA #&03:INY:INY:STA (LAE),Y :\ End of FSM list
BNE X9727                    :\ Jump forward to calculate checksum

\ Sector 2 - start of '$' directory
\ ---------------------------------
.L9547
LDY #0
.X9549
LDA Hugo,Y:INY:STA (LAE),Y   :\ Copy 'Hugo' to start of directory
CPY #&04:BNE X9549
BEQ X9732

\ Sector 6 - end of '$' directory
\ -------------------------------
.X94E7
LDA #ASC"$"
LDY #&CC:STA (LAE),Y  :\ Directory name
LDY #&D9:STA (LAE),Y  :\ Directory title
LDA #&0D
INY:STA (LAE),Y       :\ Terminate with <cr>
LDY #&CD:STA (LAE),Y  :\ Terminate with <cr>
LDY #&D6            
LDA #&02:STA (LAE),Y  :\ Parent directory
LDY #&FB            
.X9502
LDA Hugo-&FB,Y:STA (LAE),Y :\ Copy 'Hugo' to end of directory
INY:CPY #&FF:BNE X9502
BEQ X9732

\ Calculate FSM checksum
\ ----------------------
.X9727
LDA #&FF:LDY #&FE:CLC
.X9999
ADC (LAE),Y:DEY:BNE X9999    :\ Add up 254 down to 1
ADC (LAE),Y                  :\ Add byte 0
DEY:STA (LAE),Y              :\ Store at offset 255
:
.X9732
INC LAE+1                    :\ Point back to end of sector data
BNE L955B                    :\ Jump to add sector footer

.L9556
LDA #&6C:JSR L9454           :\ 256 bytes of &6C
.L955B
LDA #&F7:JSR X95AD           :\ &F7 - tell FDC to generate a CRC
LDA #&4E:LDX #&2C:JMP X95AF  :\ 44 bytes of &4E

\ Work out disk size in sectors
\ -----------------------------
.X9712
LDX #&0A
LDA L0931:BNE X970D :\ If two sides, return X=&0A, A=&00
LDX #&05
LDA L0932           :\ Tracks
CMP #80:BEQ X970D   :\ If 80 tracks, return X=&05, A=&00
LDX #&02:LDA #&80   :\ Otherwise, 40 tracks, return X=&02, A=&80
RTS
.X970D
LDA #0:RTS

.CheckMode
JSR L97A6            :\ Read current screen mode
INY:INY:BNE ChkModeChk
.CheckMode6
JSR L97A6            :\ Read current screen mode
.ChkModeChk
CPY #6:BCS ChkModeOk :\ MODE>6 or MODE>4, don't change MODE
LDA #22:JSR OSWRCH   :\ Need more memory, change to MODE 7 (drops to MODE 6)
LDA #7:JMP OSWRCH
.ChkModeOk
RTS

.PrVerifyTrack
JSR PrText
EQUS "Verifying ":EQUB 0
.PrPreTrack
LDA L0935:JSR PrNybble
STA L0936           :\ Store ASCII drive number
LDA #ASC":":JSR OSWRCH
LDA #0:JMP PrHex


\ *VERIFY <drv>
\ =============
.VERIFY
JSR L97E9:PHA         :\ Check ADFS, get drive number
JSR X9975             :\ *MOUNT the drive
LDA #0:STA L093B      :\ Start with track 0
STA L09D8:STA L09D7   :\ Sector=0
PLA:STA L0935         :\ Store logical drive number
ASL A:ASL A:ASL A     :\ drive*32
ASL A:ASL A:STA L09D6 :\ Sector=drive*32+000000
LDA #&10:STA L09EF    :\ 16 sectors per call
JSR CheckMode
JSR L97B4:STX LAE+0          :\ OSBYTE &83 - read top of user memory
TYA:SEC:SBC #&12:STA LAE+1   :\ Use 5K of memory below screen
:
\ FBLK+0  &93B=current track
\         OSWORD &72 control block
\ FBLK+1  &9D0=result
\ FBLK+2  &9D1=    \
\ FBLK+3  &9D2=     \ address
\ FBLK+4  &9D3=&FF  /
\ FBLK+5  &9D4=&FF /
\ FBLK+6  &9D5=command
\ FBLK+7  &9D6=drive*32+sector
\ FBLK+8  &9D7=sector         
\ FBLK+9  &9D8=sector         
\ FBLK+10 &9D9=count
\ FBLK+11 &9DA=0
\ FBLK+12 &9EF=sectors to do per call
\ FBLK+13 &9EC\
\ FBLK+14 &9ED } disk size
\ FBLK+15 &9EE/
\ FBLK+16 &935=physical drive number
\ FBLK+17 &936=ASCII drive number for *MOUNT

\ Verify loop
\ -----------
.Verify10
LDA #&86:JSR OSBYTE
TXA:BNE Verify11
JSR PrVerifyTrack      :\ Print 'Verifying...'
.Verify11
BIT &FF:BMI VerifyEscape
LDA #&08
JSR OSWRCH:JSR OSWRCH  :\ Print two backspaces
LDA L093B:JSR PrHex    :\ Print track number
:
LDX #0:STX L09D0       :\ Result
STX L09DA              :\ Byte 10
LDA LAE+0:STA L09D1
LDA LAE+1:STA L09D2
DEX
STX L09D3:STX L09D4    :\ Address high word
LDA #8:STA L09D5       :\ Command
LDA L09EF:STA L09D9    :\ Count
LDX #L09D0 AND 255     :\ Point to control block
LDY #L09D0 DIV 256
LDA #&72:JSR OSWORD    :\ Read sectors
LDX L09D0:BNE Verify12 :\ Report disk error
:
LDA L093B:BNE Verify13 :\ Not track 0, step to next track
LDY #&FC               :\ Point to disk size
.X9664
LDA (LAE),Y            :\ Get disk size
STA L09EC-&FC,Y        :\ Copy disk size to &9EC/D/E
INY:CPY #&FF:BNE X9664
:
OPT FNif(TARGET%<0)
  LDA #&0A:STA L09ED
  LDA #0:STA L09EC:STA L09EE
OPT FNendif
BEQ Verify13           :\ Step to next track
.VerifyEscape
JMP errEscape

.Verify12
JSR PrText             :\ Report disk error
EQUS " disc error ":EQUB 0
TXA:JSR PrHex:JSR OSNEWL
:
.Verify13
CLC:LDA L09EF          :\ Get sectors/track
ADC L09D8:STA L09D8    :\ Update sector number low
BCC Verify14:INC L09D7 :\ Update sector number mid
BNE Verify14:INC L09D6 :\ Update sector number high
.Verify14
SEC
LDA L09EC:SBC L09EF:STA L09EC  :\ Decrement number to do
LDA L09ED:SBC #0:STA L09ED
LDA L09EE:SBC #0:STA L09EE
ORA L09ED:BNE Verify15         :\ >256 to do, loop back
LDA L09EC:BEQ VerifyDone       :\ Nothing left
CMP #&10:BCS Verify15          :\ >15 to do, loop back
STA L09EF                      :\ <16 to do, do remaining amount
.Verify15
INC L093B                      :\ Increment track number
JMP Verify10                   :\ Loop back for next track
.VerifyDone
LDA L0936:JSR X9975 :\ *MOUNT the drive
JMP OSNEWL          :\ Done

.NMIClaim
LDX #&0C:LDY #&FF
JSR X97BB           :\ *FX143,12,255 - claim NMIs
LDA #&40:STA &D00   :\ Null NMI routine
STY L0933:RTS       :\ Save old NMI owner

.NMIRelease
LDX #&0B:LDY L0933    :\ *FX143,11,<num> - release NMIs
.X97BB
LDA #&8F:BNE L97B8    :\ Service call
.L97A6
LDA #&87:BNE L97B8    :\ Read screen mode
.L97B2
LDA #&7C:BNE L97B8    :\ Acknowledge Escape
.L97B4
LDA #&84              :\ Top of user memory
.L97B8
JMP OSBYTE


\ Check FS and parse drive number if ADFS
\ =======================================
.L97E9
TYA:PHA
LDA #0:TAY:JSR OSARGS
CMP #8:BEQ L97EC  :\ Filing system is ADFS
OPT FNif(TARGET%<0)
  BNE L97EC       :\ Ignore current filing system
OPT FNendif
PLA               :\ Drop Y
PLA:PLA           :\ Drop return address to command
PLA:PLA           :\ Drop return address to command dispatcher
LDY &F5:LDX &F4   :\ Restore to return to MOS
LDA #4
.L97EB
RTS
.L97EC
PLA:TAY           :\ Get command pointer back
                  :\ Check for valid drive number
                  :\ 0,1,4,5,A,B,E,F
                  :\ Should also allow leading <colon>
LDA (&F2),Y       :\ Get drive character
JSR CheckDigit    :\ Check if valid character, INY if valid
BCS errBadDrive
TAX:CMP #8        :\ Keep original drive number in X
BCC P%+4:SBC #2   :\ Convert to logical drive number
AND #3:CMP #2:BCC L97EB
.errBadDrive
JSR MkError:EQUB 205:EQUS "Bad drive":BRK
:
.CheckEnabled
JSR L9035:BCC L97EB     :\ Prompt Y/N?
JSR MkError:EQUB 146:EQUS "Aborted":BRK
:
.Hugo
EQUS "Hugo"
:
.RelocTable
]NEXT:PROCsm_table
OSCLI "*Save "+file$+" "+STR$~(mcode%+mclen%)+" "+STR$~O%+" FFFF0000 FFFBBC00"
OSCLI "Stamp "+file$
END
:
DEFFNsm_pass(pass%)
IFpass%=0:mclen%=0
IFpass%=1:mclen%=O%-mcode%
P%=&8100-128*(pass%AND2)
O%=mcode%+mclen%*(pass%AND2)DIV2
IFpass%=1:IF O%+mclen%*2.125>L%:PRINT"Code overrun":END
=VALMID$("4646",pass%+1,1)
:
DEFPROCsm_table
base80%=mcode%+mclen%:base81%=mcode%:byte%=0:count%=0:off%=0:REPEAT
byte80%=base80%?off%:byte81%=base81%?off%:IFoff%>=mclen%:byte80%=&80:byte81%=&80
IF((byte81%-byte80%) AND &FE)<>0:PRINT "ERROR: Offset by more than one page at &";~&8000+off%
IF(byte80% AND &C0)=&80:byte%=byte%DIV2+128*(byte81%-byte80%):count%=count%+1
IFcount%=8:?O%=byte%:O%=O%+1:byte%=0:count%=0
off%=off%+1:UNTILoff%>=mclen% AND count%=0
ENDPROC