Date   : Sun, 27 Apr 1997 18:27:53 +0100
From   : Mike Tomlinson <mike@...>
Subject: Re: Newbie question

In article <01BC532C.72C4D560@...>, Martin Main
<mmain@...> writes
>
>I was trying to find out what version of Basic was installed (still have 
>been unable to figure this out) 

press BREAK, and type REPORT.  This only works as long as no errors have
been reported (else REPORT will report the last error)

Or type 

P. "Basic ";CHR$?&8015

>On the right hand side where the ROM's reside a small board has 
>been installed which is some form of expansion board. However, on this 
>board is a small encapsulated device (ROM footprint size) which has wires 
>running off to an externally mounted toggle switch. There are also a pair 
>of wires running off to the main board via test type connectors (i.e. non 
>soldered) These wires run to a pin on an 74LS00 and to a pin on the ADC 
>chip.

This is the REPLAY chip by Vine Micros.  Type *help and you'll see it
listed.  It was used to copy tapes to disc, but I can't remember how to
use it now.

-- 
Mike Tomlinson:  http://www.jasper.demon.co.uk/
root@...          postmaster@...          sales@...