Date : Wed, 20 Jun 2001 11:50:39 +0100
From : Tim Fardell <tim.fardell@...>
Subject: Re: BBC MIDI Input??
Thanks to all who've replied so far - all very interesting.
Chris,
The article sounds extremely interesting. If you could dig out the
article and scan it or something I would be very grateful - but don't
bother if it's lots of hassle.
I was thinking along the lines of interpreting the note on/off and
perhaps velocity events and playing the right notes on the speaker, and
pretty much ignoring all other MIDI data. My knowledge of MIDI is
virtually non-existant, unfortunately, so I don't think my brain could
cope with much more!
I don't have any particular reason for wanting to do this - I just
thought it might be fun :-)
Thanks.
Tim.
Chris Thornley wrote:
>
> There is an RS232 to Midi interface circuit in a past elektor electronics
> magazine, I could dig the information up if you want. You'll have to program
> the serial chip directly for the correct midi board rate 11500baud. As far
> as playing midi tune is concerned you have to write some sort of (general
> midi) interpreter and have a saved sample bank. This could take up a lot of
> space. I have a BBC micro user article which has some processing code which
> will allow you to crudely play 8bit sample on the bbc speaker if this is of
> any help. I also have a sample bank from a util called GMplay but I think
> the humble bbc might not be up to multiplexing channels of sound for
> playback.
>
> I think the music 500 could be used for an intermediate solution. There's
> also a yamahaa board which you can hook up to a serial port and get it to
> output midi, I have to dig these details out though.
>
> Chris
>
> -----Original Message-----
> From: owner-bbc-micro@...
> [mailto:owner-bbc-micro@...]On Behalf Of Tim Fardell
> Sent: 19 June 2001 12:03
> To: BBC Micro Mailing List
> Subject: [BBC-Micro] BBC MIDI Input??
>
> Hi all,
>
> Just a quick question: Is there any device than enables a BBC to receive
> MIDI data, and play it out via it's sound chip and internal speaker? Bit
> of a strange thing to want to do, perhaps, but I really do want to know
> :-)
>
> TIA
>
> Tim.
>
> --
> This message represents the views of the author and does not
> necessarily accurately represent the views of BTexact Technologies.
--
This message represents the views of the author and does not
necessarily accurately represent the views of BTexact Technologies.