Date   : Mon, 27 Dec 2004 17:33:52 -0000
From   : "John & Helen Simpson" <john@...>
Subject: Re: Eprom programming problem - part 2

> "John & Helen Simpson" <john@...> wrote: 
> > When I follow the correct procedure which is (1) load buffer (2) 
> > program
> > Eprom from buffer (3) write eprom back to buffer (4) save 
> buffer (5) 
>  
> Maybe you should *read* the eprom back to the buffer. 

Yes, good point, that's what I meant to say though.

> > programming in Read mode and reading back in Write mode. This didn't
> > work and my Eprom is still blank. 
> >  
> > Something must be wrong, any ideas?
>  
> Have you tried reading a known non-blank EPROM? That would 
> confirm if the 
> reading is working, which would narrow the fault down to the writing. 

Good idea, I'll try that.

john