Date   : Sat, 02 Jul 2005 15:34:56 +0100
From   : "BeebMaster" <beebmaster@...>
Subject: Re: Econet Real Time Clock

Many thanks for your help, in fact I have 3  L3 RTC modules.  Do you know how
it is programmed?

Best wishes,


Ian

----- Original Message -----
From: Mike Tomlinson
To:  bbc-micro@...
Sent: Sat, 2 Jul 2005 14:24:47 +0100
Subject: Re: [BBC-Micro] Econet Real Time Clock

In article <CC307CC9FA81401F82EC2B0066B72288.MAI@...>,
BeebMaster <beebmaster@...> writes

>1.  Does anybody have the original unadulterated Level 3 FS?  I
>would like to try to see what happens without the clock.

I do. It says it can't find the clock and refuses to run.

The clock is an ugly effort - it's a small black module which connects
to the user port via a short cable. The contents are potted with epoxy
so near impossible to get at (well, the one I saw was.)

>2.  Does anybody know how to either read or write to the clock
>inside the RTC module?  OSWORD 14/15 when used on a BBC B
>do not seem to have any effect.

The L3FS clock module didn't use OSWORD 14/15.  If you want a RTC
upgrade for a BBC B that is OSWORD 14/15 compatible, the Solidisk RTC
is. (it'll even allow TIME$ to work if you change the cpu for a 65C02
and fit a BASIC4 ROM.)

Mike