Date : Sat, 13 May 2006 23:55:43 +0100 (BST)
From : Pete Turnbull <pete@...>
Subject: Re: More fun with DFS, TUBE, yada yada
On May 13 2006, 17:20, Ian Wolstenholme wrote:
>
> According to the 6502 Second Processor Service Manual, there is a
link on the
> board you can set to power the second processor via the Tube,
although this
> is probably not recommended.
A Beeb should easily have enough spare capacity for that. I have
almost always had my 6502 2nd Processors powered that way, and my Z80
is like that now. In fact, for many years, I had a 6502 and a Z80
bolted together using PCB support pillars, with a double-throw
centre-off switch between them, on the links. That way I could have
either or neither turned on. If you're wondering how I got both
connected to the Tube at the smae time, I crimped a 40-pin IDC header
onto the Tube ribbon cable for the 6502, and plugged the Z80's Tube
ribbon into that.
--
Pete Peter Turnbull
Network Manager
University of York