Date   : Sun, 28 Nov 2010 22:56:02 +0000
From   : mark@... (Mark Usher)
Subject: remote access via serial link

How about some sort of relay from one of the printer port lines. That could
then be addressed from code. My other thought is to use a USB ir blaster
with a remote controlled power socket :-)

//Mark

On 28 Nov 2010,@21:56, Rick Murray <rick@...> wrote:

> On 28/11/2010 18:55, J.G.Harston wrote:
> 
>> In the past I toyed with the idea of connecting the cassette
>> motor rely to the Reset line, so then *MOTOR 1 would cause
>> a Reset.
> 
> Sounds like a plan. Ought to be a doddle to implement, two hookup wires 
> and a soldering iron...
> 
> 
> Just be careful if you're developing and messing with extra memory not 
> to *SAVE and /then/ realise you switched to CFS so you could push PAGE 
> down a little. ;-)
> 
> 
> Best wishes,
> 
> Rick.
> 
> -- 
> Rick Murray, eeePC901 & ADSL WiFI'd into it, all ETLAs!
> BBC B: DNFS, 2 x 5.25" floppies, EPROM prog, Acorn TTX
> E01S FileStore, A3000/A5000/RiscPC/various PCs/blahblah...
> 
> _______________________________________________
> bbc-micro mailing list
> bbc-micro@...
> http://lists.cloud9.co.uk/mailman/listinfo/bbc-micro