Date   : Mon, 16 Feb 2015 09:00:06 +0000
From   : julian@... (Julian)
Subject: Acorn Z80 2p on Terasic development boards

On 15/02/2015 22:27, John Kortink wrote:
> Some of you may be aware of my Acorn 6502 Second Processor
> implementation for several Terasic development boards (DE1,
> DE0 Nano and Cyclone V GX Starter Kit). Today it is joined
> by the Acorn Z80 Second Processor.
>
> See :
>
> http://web.inter.nl.net/users/J.Kortink/home/hardware/terasic_de1/index.htm
> http://web.inter.nl.net/users/J.Kortink/home/hardware/terasic_de0nano/index.htm
> http://web.inter.nl.net/users/J.Kortink/home/hardware/terasic_cyclonevgxstarterkit/index.htm
>
> It runs at the standard 6 MHz, or up to 30, 50 and 50 MHz
> respectively on the DE1, DE0 Nano and Cyclone V GX Starter
> Kit.

Interesting stuff - I'm coming at this from a perspective of complete 
ignorance of the boards and FPGA's in general but is there any advantage 
/ difference between the implementation on the different boards, or 
would the cheapest of the three work just as well for this purpose?

Julian.

> Enjoy.
>
>
> John Kortink
>