<< Previous Message Main Index Next Message >>
<< Previous Message in Thread This Month Next Message in Thread >>
Date   : Tue, 23 Feb 2016 19:34:33 +0000
From   : djameson@... (Daniel Jameson)
Subject: 32016 Second Processor on DE0 Nano

Just as a flag (and I remember now) - we encountered a problem with the LX9
copro and econet way back when that was being tested. -> NFS uses R3 in 2
byte mode and as no other filesystems do, it took econet to show a problem
with it. I can't easily the 32016 copro like this, but if the De0 6502 uses
the same tube code (I'm guessing it does?) I can put it through its paces
with NFS and rule out any problems there.

Best,
Daniel

On 23 February 2016@..., Daniel Jameson <djameson@...> wrote:

> Thanks John. I'll see if I can pinpoint what's going wrong.
>
> Jonathan, as a first test is System11.zip the entire MDFS install?  If I
> just unzip it onto my MDFS as SYST should it be good-to-go?  I think the
> Panos 1.4 images are OK - I can boot from them from floppy, they just go
> wrong when installed on the MDFS...
>
> Best,
>
> Daniel
>
> On 23 February 2016@..., John Kortink <kortink@...> wrote:
>
>>
>> On Tue, 23 Feb 2016 14:49:28 +0000, Daniel Jameson <djameson@...>
>> wrote:
>>
>> >[...]
>> >
>> >John, if it's the co-pro rather than the method of install, do you have
>> any
>> >interest in debugging this? I'm very happy to try and work through it
>> with
>> >you?
>>
>> It's very unlikely to be the copro. Apart from one config bit, Pandora
>> has not been changed, and I tested the whole thing extensively under
>> Panos 1.4.
>>
>> If you can prove that the copro is to blame, I can certainly have a look.
>> I would certainly be bothered by the incompatibility.
>>
>>
>> John Kortink
>>
>> --
>>
>> Email    : kortink@...
>> Homepage : http://www.zeridajh.org
>>
>> _______________________________________________
>> bbc-micro mailing list
>> bbc-micro@...
>> http://lists.cloud9.co.uk/mailman/listinfo/bbc-micro
>>
>
>
<< Previous Message Main Index Next Message >>
<< Previous Message in Thread This Month Next Message in Thread >>