<< Previous Message Main Index Next Message >>
<< Previous Message in Thread This Month Next Message in Thread >>
Date   : Mon, 23 Apr 1984 12:42:37 EST (Mon)
From   : Mike Ciaraldi <ciaraldi@rochester.arpa>
Subject: BYE on Z-100

I have a friend who is trying to get BYE working on his
Zenith Z-100 under CP/M-85 or CP/M-86.
We downloaded BYE3.19 and some of the overlays from 
SIMTEL20.

We couldn't use the HZ100 overlay directly, becuase he
has a PMMI S-100 plug-in modem, instead of an external
modem connected to the Z-100's serial port.
So, we tried the PMMI overlay.

When we run BYE, it prints a sign-on message.
>From thhen on, we can give it a CTRL-C and it will ask
if we want to ressume or re-boot. Both seem to work.

So, what's the problem? When you call, it doesn't
answer the phone!
The PMMI works all right for calling out, using
MDM728. Has anyone else tried using a PMMI
in a Z-100 with BYE?

Any help would be appreciated.

Address replies to:

Mike Ciaraldi
ARPA: ciaraldi@rochester
Usenet: seismo!rochester!ciaraldi

or 

Mike Bentley
Usenet: seismo!rochester!ritcv!aii
<< Previous Message Main Index Next Message >>
<< Previous Message in Thread This Month Next Message in Thread >>