Date   : Wed, 19 Dec 1984 14:23:00 GMT
From   : greenber%acf4.uucp@BRL-TGR.ARPA
Subject: Re: EPROM burner wanted

<>

I use a really nice EPROM burner:

Programmer 4+
Periphco
1659 Scott Blvd #1
Santa Clara, CA 95050
(408)-244-5214

It costs about $200.  Features:
       -       Programs 2716, 2732, 2764, 27128's
       -       RS232
       -       Selectable as Data set or terminal
       -       All Dc is generated on board (you do have to buy you're own
                       transformer!)
       -       Handles the "A"'s too: 21/25 VDC
       -       ZIF on board
       -       Software is pretty good: Program, Read, Verify. Dumps in
                       ASCII and HEX
       -       CP/M and other os's 

It does not come in a pretty box, it is pretty slow, it isn't as nice as
the $5000 DataIo I use sometimes, but it meets my "home/hobby/business"
purposes.

I'm not attached to Periphco, except at the wrist and ankles.

Call them and ask for the spec sheet.


Ross M. Greenberg  @ NYU   ---->  allegra!cmcl2!acf4!greenber  <----