Date   : Wed, 25 Feb 1987 17:09:23 est
From   : "G. J. Marwood" <marwood@dmc-crc.arpa>
Subject: Applicard and Super Serial Card at 9600 baud

Does anyone have any experience of using the PCPI Applicard and Super Serial
card at 9600 baud.  I have tried this and found that a lot of characters are
dropped.  As the basic Super Serial Card in dumb terminal mode (working
totally in the Apple environment) does not seem to have this problem, I 
suspect that the difficulty arises because of slow communication 
between the Apple and the Applicard (in character rather than block mode).
One solution, if indeed this is the problem, might be to use the SIO board
which plugs directly into the Applicard.  If any one has any other ideas
I would appreciate them.
                                      thank you in advance

Gordon Marwood