Date   : Mon, 23 Mar 1987 14:09:22 GMT
From   : kodak!gardner@CS.ROCHESTER.EDU (dick gardner)
Subject: Re: converting a CP/M operation to IBM PC

In article <LIN.12288442266.BABYL@XX.LCS.MIT.EDU> LIN@XX.LCS.MIT.EDU writes:
>
>I currently run a Compupro S-100 system with CPM 2.2 or MPM 8/16 -- 8
>inch floppies.  Any ideas how I can transfer my important stuff
>(documents, spreadsheets, databases) to an IBM-compatible layout?
>
>I guess what I need is some way to write all my files onto a 5 1/4
>inch floppy that my IBM can read.
>
>Help?
>
       I think the easiest way is to do it is Kermit-Kermit file transfer.
I did this successfully when I made the switch from CP/M to PC-DOS.
Just connect serial ports together and go.  (You will probably have to
switch XMIT and RECV lines - 2&3)


=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#

             Dick Gardner
             Eastman Kodak Co.
             Rochester, New York  14650
             (716) 477-1002
       UUCP: rochester!kodak!gardner

To err is human -- to really screw it up
                  you need a computer!
=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#