Date   : Wed, 05 Dec 1990 18:45:03 GMT
From   : csus.edu!wuarchive!emory!hubcap!ncrcae!ncr-sd!simasd!simasd!pnet07!donm@ucdavis.ucdavis.edu (Don Maslin)
Subject: Strange Kaypro problems

fzsitvay@techbook.com (Frank Zsitvay) writes:
>
>   ok, mine has one serial port, and no graphics or attributes.  also,
>after formatting a double sided kaypro floppy on my AT with uniform,
>the kaypro claimed it was a single sided floppy, so apparently it has
>single sided drives.   would i need to change the bios to add double
>sided drives?? ...

Open the box and check the monitor ROM.  If it is 81-232-A, you have a later
II/83 which shares the same board with the 4/83 and DSDD should be no problem.
If it is 81-149-C, I don't know.  However, all three used the same CP/M 2.2F.
> 

Keeper of the CP/M System Disk | UUCP: {nosc ucsd crash ncr-sd}!pnet07!donm
Archives for the Dino(saur)SIG | ARPA: simasd!pnet07!donm@nosc.mil
- San Diego Computer Society - | INET: donm@pnet07.cts.com