Date : Thu, 10 Jan 1991 20:04:31 GMT
From : littlei!intelhf!ptdcell0.intel.com!snelson@uunet.uu.net (shannon nelson)
Subject: Using MediaMaster and Uniform (was Re: Osborne1 to Kaypro 2X)
In article <9101091819.AA00877@icf.llnl.gov.llnl.gov> rzh@ICF.LLNL.GOV
(R. Hanscom) writes:
>
> ... I can tell you, from personal experience,
>that it will NOT read these Ozzy diskettes, if they are single density,
>on a vanilla PC clone unless you have a specialized controller/drives.
>It has problems with single density diskettes (early Osbournes used SD).
>There are other formats that they advertise, that will not work (Cromemco
>DSDD is a notable example). ...
>
I've worked with both MediaMaster and Uniform, though not with a large
number of off-the-wall systems. However, I have noticed that I usually
must format the transfer diskette with MM or Uniform before copying the
data onto the disk. When formatted by the target machine, MM & Uniform
often can't read it. When formatted with MM or Uniform, usually both
can read and write the diskette.
Hope it helps...
--
=============================================================================
Shannon Nelson Portland Technology Development, Intel
snelson@ptd.intel.com (503) 642-8149 I don't speak for Intel
Parents can't afford to be squeemish.
End of INFO-CPM Digest V91 Issue #10
************************************