Date   : Thu, 26 Oct 2006 20:50:31 +0100
From   : hideki.adam@... (adam colley)
Subject: VersEPROM dip switch settings

Hihi

On 26/10/06, Sprow <info@...> wrote:
> > There's a rather poor quality pic (due to my camera and its not
> > liking close objects than my photography as such) at
> > http://www.1984.org.uk/pogo/verseprom.jpg
> Yup - that's the same as mine (except the name). Pasted DIP switch settings
> are:
[Snip snip snip]
> The 1st column tells you how many 16k blocks the PROM has to be split into,
> the second is the device name, the third is the switch setting for that
> block (reading left to right for the 8 DIP switches).

Ahh, works nicely, thankyou :p

> The 62xxxE are EPROM emulators, same as described on my webpage in the
> "Build it yourself" section,

Yes, I noticed that on your site, lol, I was pondering making one

Incidentally, did you get my message about that 1770 controller board
I've acquired?

Basically says DDFS WD1770 SOLIDISK on it, wondering how to install it
and if it will work with your DOS filesystem and ADFS 1.3 etc.

-- 
Hideki.Adam